Study on electrochemical corrosion of magnesium alloys by laser shock processing in NaCl solution

被引：0
|
作者：
Zhang, Qinglai [1 ]
Qian, Yang [1 ]
An, Zhibin [2 ]
Li, Xingcheng [1 ]
Zhang, Yongkang [3 ]
Wang, Sishun [1 ]
机构：
[1] School of Materials Science and Engineering, Jiangsu University, Zhenjiang , 212013, Jiangsu
[2] College of Engineering, Airforce Engineering University, Xi'an , 710038, Shaanxi
[3] School of Mechanical Engineering, Southeast University, Nanjing , 210096, Jiangsu
来源：
Zhongguo Jiguang/Chinese Journal of Lasers | 2014年 / 41卷 / 09期
关键词：
Electrochemical impedance spectroscopy; Laser optics; Laser shock processing; Magnesium alloys; Microstructure; Self-corrosion potential;
D O I：
10.3788/CJL201441.0903002
中图分类号：
学科分类号：
摘要：
In order to study the effect of laser shock processing (LSP) on the electrochemical corrosion resistance of magnesium alloys, the electrochemical corrosion behaviors in 3.5% (mass fraction) NaCl solution of AZ31, AZ61 and AZ91 magnesium alloys are investigated by electrochemical method and Nd: glass laser with the wavelength of 1064 nm and pulse width of 20 ns. Its surface morphologies, microstructures, microhardness, self-corrosion potential and electrochemical impedance spectroscopy (EIS) are also examined and analyzed. The experimental results show that electrochemical corrosion resistance of magnesium alloys are improved after LSP. With the increasing of laser power density, the self-corrosion potential of magnesium alloy begins to move towards a positive direction, the corrosion current density decreases and the impedance arc becomes larger. When power density reaches to 0.7 GW/cm2, the current density increases and impedance arc becomes smaller. The effect of the Al content, solution and aging treatment on the corrosion potential and EIS of magnesium alloys by LSP are discussed and analyzed.
引用
收藏
相关论文
共 16 条
  • [1] Hao X., Zhou W., Zheng Z., Study on electrochemical corrosion behaviors of AZ31 magnesium alloys in NaCl solution, Journal of Shenyang Normal University (Natural Science), 22, 2, pp. 117-121, (2004)
  • [2] Li L., Yu S., Lei J., Et al., Study on time-dependent electrochemical corrosion behavior of AZ31 magnesium alloy in NaCl medium, Ordnance Material Science and Engineering, 31, 6, pp. 8-11, (2008)
  • [3] Chen C., Zhang T., Shao Y., Et al., Electrochemical noise analysis for corrosion of AZ91 magnesium alloy in alkaline chloride medium, Corrosion Science and Protection Technology, 21, 1, pp. 15-19, (2009)
  • [4] Shi H., Chen Z., Zhang J., Et al., Formation mechanism of twins in AZ61 magnesium alloy during aging, Special Casting & Nonferrous Alloys, 29, 9, pp. 867-869, (2009)
  • [5] Liu Z., Liu C., Wang Z., Et al., Influence of solution and aging on mechanical properties of AZ91HP die-casting alloy, 35, 8, pp. 869-873, (1999)
  • [6] Zhang Y., Chen J., Xu R., Experimental research of laser shock strengthening AM50 magnesium alloy, 35, 7, pp. 1068-1072, (2008)
  • [7] Huang S., Zhou J., Jiang S., Et al., Study on strain hardening and fatigue fracture of AZ31B magnesium alloy after laser shot peening, 38, 8, (2011)
  • [8] Yu S., Yao H., Wang F., Et al., Influence of interaction parameters on high power laser induced shockwave in magnesium alloy, 37, 5, pp. 1386-1390, (2010)
  • [9] Xiang J., Ge M., Effect of laser shock processing on surface quality of AZ31B magnesium alloy, Electromaching & Mould, 4, pp. 26-29, (2012)
  • [10] Zhang Y., You J., Lu J., Et al., Effects of laser shock processing on stress corrosion cracking susceptibility of AZ31B Magnesium alloy, Surface & Coatings Technology, 204, 24, pp. 3947-3953, (2010)
12