Experimental investigation of the effect of using different aggregate types on WMA mixtures

被引：0

作者：

Fallah Tafti M. ^{[1
]}

Khabiri M.M. ^{[1
]}

Khani Sanij H. ^{[1
]}

机构：

[1] Department of Civil Engineering, Yazd University

来源：

Khabiri, Mohammad Mehdi (mkhabiri@yazd.ac.ir) | 1600年 / Elsevier B.V., Singapore卷 / 09期

关键词：

Moisture susceptibility; Performance characteristics; Sasobit; Type of aggregate; Warm mix asphalt; Zeolite;

D O I：

10.1016/j.ijprt.2016.09.006

中图分类号：

学科分类号：

摘要：

In recent years, production of warm mix asphalt (WMA) mixtures with the help of chemical additives has been developed due to obvious advantages, such as reduction of pollution emissions, construction temperature and the possibility of carrying asphalt in long distances. Various additives can have positive or negative effects on the performance characteristics of WMA mixtures made from different types of aggregates. Although, effects of different types of aggregates have been more investigated on the performance of hot mix asphalt (HMA), the effects on WMA have been less studied. Therefore, in this study, three types of aggregates including: limestone (Li), siliceous (Si) and slag (Sl) from the metal production factories together with Sasobit and Zeolite additives were provided to be used for the WMA mixtures. After constructing the asphalt samples and determining the optimum binder, Marshall Stability, indirect tensile strength tests and resilient modulus test and the durability parameter determination were performed. Test results indicated that WMA-Sasobit mixtures have the greatest impact on reducing consumed percentage of binder in slag and siliceous aggregates compared to limestone aggregates. For both additives, WMA mixtures containing limestone aggregates showed higher resilient modulus and siliceous aggregates showed lower resilient modulus. Moreover, the results of indirect tensile strength of specimens containing limestone aggregates showed the highest value and siliceous aggregates showed the lowest one. TSR in the limestone and slag aggregates was improved using both additives, but Zeolite additives reduce TSR in the siliceous aggregates. © 2016 Chinese Society of Pavement Engineering

引用

页码：376 / 386

页数：10

共 36 条

[11]

Ameri M., Hesami S., Goli H., Laboratory evaluation of warm mix asphalt mixtures containing electric arc furnace (EAF) steel slag, Constr. Build. Mater., 49, pp. 611-617, (2013)

[12]

Valdes-Vidal G., Calabi-Floody A., Miro-Recasens R., Norambuena-Contreras J., Mechanical behavior of asphalt mixtures with different aggregate type, Constr. Build. Mater., 101, pp. 474-481, (2015)

[13]

Shuang C., Bamber R.K., Blackman A., Kinloch J., Ambrose C.T., Durability of asphalt mixtures: effect of aggregate type and adhesion promoters, Int. J. Adhes. Adhes., 54, pp. 100-111, (2014)

[14]

Solaimanian M., Harvey J., Tahmoressi M., Tandon V., Test methods to Predict Moisture Sensitivity of Hot-mix Asphalt Pavements, pp. 77-110, (2003)

[15]

Kandhal P.S., Field and laboratory investigation of stripping in asphalt pavements: state of the art report, Transp. Res. Rec., 1454, pp. 69-72, (1994)

[16]

Kavussi A., Hashemian L., Laboratory evaluation of moisture damage and rutting potential of WMA foam mixes, Int. J. Pavement Eng., 13, 5, pp. 415-423, (2012)

[17]

Penny J.E.

[18]

Shu X., Huang B., Shrum E.D., Jia X., Laboratory evaluation of moisture susceptibility of foamed warm mix asphalt containing high percentages of RAP, Constr. Build. Mater., 35, pp. 125-130, (2012)

[19]

Ai C., Li Q.J., Qiu Y., Testing and assessing the performance of a new warm mix asphalt with SMC, J. Traffic Transp. Eng. (Eng. Ed.), 2, 6, pp. 399-405, (2015)

[20]

Raghavendra A., Medeiros M., Hassan M., Mohammad L., King W., Laboratory and construction evaluation of warm-mix asphalt, J. Mater. Civ. Eng., 28, 7, (2016)

← 1 2 3 4 →