Study on the aerodynamic performance of blade airfoil of vertical axis wind turbine at low reynolds number

被引:1
|
作者
机构
[1] Zhao, Li-Hua
[2] Liu, Ming
[3] Lv, Tie
来源
Zhao, L.-H. | 1600年 / Asian Network for Scientific Information卷 / 12期
关键词
Angle of attack - Computational fluid dynamics - Drag - Lift drag ratio - Wind power - Wind turbine blades - Turbine components - Vertical axis wind turbine - Lift - Reynolds number - Turbomachine blades;
D O I
10.3923/itj.2013.3042.3045
中图分类号
学科分类号
摘要
The utilization efficiency of wind energy is directly affected by airfoil aerodynamic performance. So, it is important to study it. In this study, CFD software is used to analyze the aerodynamic performance of lift type vertical axis wind turbines at low Reynolds number. Three types of airfoil which are NACA2414, NACA4414 and NACA6414, are analyzed by numerical simulation, mainly study the influence of relative camber airfoil on wind turbine aerodynamic performance under different angle of attack and the change rule of airfoil aerodynamic parameters and the state of streaming for these three types of airfoil under different angle of attack is obtained. The result shows that the lift coefficient of airfoil under different Angle of attack and lift-drag ratio will increase, with relative camber airfoil increasing,the airfoil thickness keeping stable,but the airfoil drag coefficient has no obvious change, it will help the optimal design of airfoils for vertical axis wind turbines. © 2013 Asian Network for Scientific Information.
引用
收藏
相关论文
共 50 条
  • [21] A Study of Impacts of Airfoil Geometry on the Aerodynamic Performance at Low Reynolds Number
    Alsahlani, Ahmad A.
    Al-Saad, Mohammed
    Mosallam, Mohammed Al-
    INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND ROBOTICS RESEARCH, 2023, 12 (02): : 99 - 106
  • [22] Blade thickness effect on the aerodynamic performance of an asymmetric NACA six series blade vertical axis wind turbine in low wind speed
    Mazarbhuiya, Hussain Mahamed Sahed Mostafa
    Biswas, Agnimitra
    Sharma, Kaushal Kumar
    Mazarbhuiya, Hussain Mahamed Sahed Mostafa (mdhussain0309@gmail.com), 1600, Bellwether Publishing, Ltd. (17): : 171 - 179
  • [23] Numerical investigation of the aerodynamic characteristics for the integrated vertical movable vanes with the airfoil straight blade vertical axis wind turbine
    Suffer, Kadhim H.
    Yousif, Isam E.
    Razlan, Zuradzman M.
    INTERNATIONAL CONFERENCE ON ADVANCED MANUFACTURING AND INDUSTRY APPLICATIONS, 2018, 429
  • [24] Research on Aerodynamic Performance of J-type Blade Vertical Axis Wind Turbine
    Pan, Lin
    Xiao, Haodong
    Zhang, Yanwei
    Shi, Zhaoyang
    PROCEEDINGS OF THE 32ND 2020 CHINESE CONTROL AND DECISION CONFERENCE (CCDC 2020), 2020, : 5454 - 5459
  • [25] Aerodynamic Characteristics of a Single Airfoil for Vertical Axis Wind Turbine Blades and Performance Prediction of Wind Turbines
    Mitchell, Samuel
    Ogbonna, Iheanyichukwu
    Volkov, Konstantin
    FLUIDS, 2021, 6 (07)
  • [26] Effect of blade number on performance of drag type vertical axis wind turbine
    Zheng M.
    Li Y.
    Teng H.
    Hu J.
    Tian Z.
    Zhao Y.
    Applied Solar Energy, 2016, 52 (4) : 315 - 320
  • [27] Study on aerodynamic performance of a combined vertical axis wind turbine based on blade element momentum theorem
    Zhang, Lei
    Qu, Jianjun
    JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY, 2021, 13 (03)
  • [28] Numerical Analysis of Wind Turbine Airfoil Aerodynamic of Wind Turbine Blade
    Yan, Choy Hau
    Biao, Tee Swee
    Fei, Chay Tick
    2022 7TH INTERNATIONAL CONFERENCE ON MECHATRONICS SYSTEM AND ROBOTS, ICMSR, 2022, : 1 - 4
  • [29] Numerical Simulation of Unsteady Aerodynamic Performance of Novel Adaptive Airfoil for Vertical Axis Wind Turbine
    Tong, Hui
    Fang, Jian
    Guo, Jinyang
    Lin, Kun
    Wang, Ying
    ENERGIES, 2019, 12 (21)
  • [30] The analysis of wind blade on the performance of Vertical Axis Wind Turbine
    Kong, Nurziana Kong Johan
    Abu Bakar, Rosli
    Leang, Lim Yi
    Hamidi, Mohd Adnin
    5TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING RESEARCH 2019 (ICMER 2019), 2020, 788