Study on overlapping process in laser transformation hardening of stamping die

被引:0
|
作者
Wang, Heng-Hai [1 ]
Yu, Gang [1 ]
Dang, Gang [1 ]
He, Xiu-Li [1 ]
机构
[1] Key Lab of Mechanics in Advanced Manfacturing, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, China
来源
Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment | 2008年 / 29卷 / 06期
关键词
Wear resistance - Cast iron - Pulsed lasers - Hardening - Surface roughness;
D O I
暂无
中图分类号
学科分类号
摘要
Microhardness, surface roughness and phase transformation of overlapping zone in multi-track laser hardening on a ductile cast iron QT700-2 were tested. The experimental results show that with proper processing parameters, the microhardness of treated layer can be higher than 50HRC. The temper softening in overlapping zone can be prevented by changing the overlapping ratio. The interlaced distribution of martensite and non-uniform, multi-scale structure in hardened zone after multi-track laser hardening led to a good wear and fatigue resistance of surface. Processing parameters of laser hardening on ductile cast iron were optimized.
引用
收藏
页码:168 / 172
相关论文
共 50 条
  • [41] Study of the gradient structure of 45 steel by laser transformation hardening (the influence of laser scanning speed)
    Zhang, Guangjun
    Wu, Xiaohui
    Xing, Qi
    Yingyong Jiguang/Applied Laser Technology, 2003, 23 (05):
  • [42] Study on the hardened case discrepancy between the beginning and the end of laser scanning in laser transformation hardening
    Wu, G
    Song, GM
    LASERS IN MATERIAL PROCESSING AND MANUFACTURING II, 2005, 5629 : 436 - 443
  • [43] THE PREDICTION OF CASE DEPTH IN LASER TRANSFORMATION HARDENING
    SHERCLIFF, HR
    ASHBY, MF
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1991, 22 (10): : 2459 - 2466
  • [44] LASER TRANSFORMATION HARDENING WITH A TORIC MIRROR.
    Yao, Shanchang
    Jinshu Rechuli/Heat Treatment of Metals, 1986, (05): : 3 - 8
  • [45] Numerical simulation of pulsed laser transformation hardening
    Yu, G
    Wu, W
    Liang, NG
    Computational Mechanics, Proceedings, 2004, : 763 - 769
  • [46] Numerical and Experimental Analysis of Hardening Distortions of Drawpieces Produced in Hot Stamping Process
    Wrobel, Ireneusz
    METALS, 2021, 11 (03) : 1 - 14
  • [47] Calculation of laser transformation hardening with circular beam
    Yan, B. G.
    Liu, J. C.
    MATERIALS TECHNOLOGY, 2012, 27 (01) : 5 - 7
  • [48] An analysis of the effect of laser beam geometry on laser transformation hardening
    Safdar, Shakeel
    Li, Lin
    Sheikh, M. A.
    Liu, Zhu
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2006, 128 (03): : 659 - 667
  • [49] Modelling kinetics of phase transformation for the indirect hot stamping process
    Hippchen, Paul
    Merklein, Marion
    Lipp, Arnulf
    Fleischer, Michael
    Grass, Hannes
    Philipp, Craighero
    SHEET METAL 2013, 2013, 549 : 108 - +
  • [50] Process Parameters Analysis of Laser Phase Transformation Hardening on the Raceway Surface of Shield Main Bearing
    He, Peiyu
    Ding, Yi
    Jiang, Shiying
    Zhang, Hengjie
    Shen, Tianyu
    Wang, Yun
    PHOTONICS, 2023, 10 (03)