Distributed control system time sequence optimization based on FAHP

被引：0

作者：

Zhang, Xiaoyang ^{[1
]}

Shi, Yaoyao ^{[1
]}

He, Xiaodong ^{[1
]}

Kang, Chao ^{[1
]}

Zhang, Jun ^{[1
]}

机构：

[1] Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Ministry of Education, Northwestern Polytechnical University, Xi'an

来源：

Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS | 2015年 / 21卷 / 09期

基金：

中国国家自然科学基金;

关键词：

Distributed control system; Fuzzy analytic hierarchy process; Optimization; Temporal response; Twister;

D O I：

10.13196/j.cims.2015.09.018

中图分类号：

学科分类号：

摘要：

To enable the communication real-time performance of various parameters in master-slave mode distributed control system be corresponded with their weights, the optimization method of distributed control system communication time sequence based on Fuzzy Analytic Hierarchy Process(FAHP) was proposed. By taking winding machine distributed control system as a case study, an evaluation criterion for response priority weights of parameters was drew up, and the parameters priority weights were analyzed with FAHP. The communication proportion of various parameters in winding machine distributed control system was adjusted according to the analysis result to replace the polling mode, which achieved the aim of reducing weighting average response time. The result showed that the response time of relative important parameters could be shortened while the response time of relative minor ones could be lengthen. The result of shorten the weighting average response time after optimization was increased significantly with increasing difference of various parameters. The optimization result was consistent with the adjustment tendency of parameter time series. ©, 2015, CIMS. All right reserved.

引用

页码：2419 / 2426

页数：7

共 18 条

[1]

Hu H., Xu Y., Liang W., Et al., Advanced process control applied to distributed control systems, Kybernetes, 39, 6, pp. 946-953, (2010)

[2]

Hou D., Lin M., Yang Z., Et al., The development and application of nuclear power plant DCS closed-loop test platform, Nuclear Power Engineering, 32, 4, pp. 66-71, (2011)

[3]

Liu M., Shi R., Research on evolution of opening distributed control system and its communication technology, Journal of Xi'an Jiaotong University, 36, 8, pp. 863-866, (2002)

[4]

Wang Z., Yang S., Research of cmmunication mchanism in bus topology DCS system based on Petri net, Journal of Xi'an Technological University, 30, 3, pp. 281-286, (2010)

[5]

Zhang S., The design of realtime communication in distributed control system, (2006)

[6]

Yu H., Huang J., Analysis of the time-delay of aeroengine distributed control system, Measurement and Control Technology, 27, 6, pp. 50-51, (2008)

[7]

Wang C., Luo A., Distributed Control System Design and Application Examples, pp. 90-91, (2004)

[8]

Li Y., Zhu L., Product usability evaluation method based on fuzzy analytic hierarchy process, Journal of Mechanical Engineering, 48, 14, pp. 183-191, (2012)

[9]

Li W., Wang X., Jing Y., Influencing factors of radio frequency identification adoption for automobile production line, Computer Intergrated Manufacturing Systems, 18, 3, pp. 575-582, (2012)

[10]

Shi Y.Y., Tang H., Yu Q., Development of a NC tape winding machine, Global Design to Gain a Competitive Edge, pp. 753-762, (2008)

← 1 2 →