A generalized mechanistic kinetic model for the hydroisomerization and hydrocracking of long-Chain paraffins

被引：64

作者：

Kumar, Hans ^{[1
]}

Froment, Gilbert F. ^{[1
]}

机构：

[1] Artie McFerrin Department of Chemical Engineering, Texas A and M University, College Station

来源：

Industrial and Engineering Chemistry Research | 2007年 / 46卷 / 12期

关键词：

Bifunctional catalyst - Hydroisomerization - Kinetic model;

D O I：

10.1021/ie060957w

中图分类号：

学科分类号：

摘要：

A mechanistic kinetic model has been developed for the three-phase hydroisomerization and hydrocracking of long-chain paraffins in which rate-determining steps are assumed to occur on both acid and metal sites of the bifunctional catalyst. The frequency factors for the acid site elementary steps are modeled using the single-event concept and the corresponding activation energies using the Evans-Polanyi relationship. The rate coefficients for the dehydrogenation reactions on the metal sites of the catalyst are classified into five different classes depending on the nature (i.e., primary, secondary, or tertiary) of the carbon atoms forming the double bond. The model contains 14 independent parameters for the hydroisomerization and hydrocracking of heavy paraffins. These parameters are estimated from experimental data on the three-phase isothermal hydrocracking of n-hexadecane in a tubular reactor. A number of reactor simulations have been performed for various operating conditions and hydrocarbons of different chain lengths. The effect of the relative metal to acid activity of the catalyst on the isomerization and cracking selectivities and on the carbon number distribution of the products is discussed in detail. © 2007 American Chemical Society.

引用

页码：4075 / 4090

页数：15

共 41 条

[31]

Froment G.F., Depauw G.A., Vanrysselberghe V., Kinetic Modeling and Reactor Simulation in Hydrodesulfurization of Oil Fractions, Ind. Eng. Chem. Res, 33, 12, pp. 2975-2988, (1994)

[32]

Sato Y., Hirose H., Takahashi F., Toda M., First Pacific Chemical Engineering Congress, (1972)

[33]

Reiss L.P., Cocurrent Gas-Liquid Contacting in Packed Columns, Ind. Eng. Chem. Proc. Des. Dev, 6, 4, (1967)

[34]

Charpentier X., Chem. Eng. J, 11, (1976)

[35]

Denayer J.F., Bouyermaouen A., Baron G.V., Adsorption of Alkanes and Other Organic Molecules in Liquid Phase and in the Dense Vapor Phase: Influence of Polarity, Zeolite Topology, and External Fluid Density and Pressure, Ind. Eng. Chem. Res, 37, 9, pp. 3691-3698, (1998)

[36]

Denayer J.F., Baron G.V., Souverijns W., Martens J.A., Jacobs P.A., Hydrocracking of n-Alkane Mixtures on Pt/H-Y zeOlite: Chain Length Dependence of the Adsorption and the Kinetic Constants, Ind. Eng. Chem. Res, 36, 8, pp. 3242-3247, (1997)

[37]

Martens G.G., Marin G.B., Kinetics for Hydrocracking Based on Structural Classes: Model Development and Application, AIChE J, 47, 7, pp. 1607-1622, (2001)

[38]

Schulz H.F., Weitkamp J.H., Zeolite Catalysts - Hydrocracking and Hydroisomerization of N-Dodecane, Ind. Eng. Chem. Prod. Res. Dev, 11, 1, (1972)

[39]

Alvarez F., Ribeiro F.R., Perot G., Thomazeau C., Guisnet M., Hydroisomerization and Hydrocracking of Alkanes - Influence of the Balance between Acid and Hydrogenating Functions on the Transformation of n-Decane on PtHY Catalysts, J. Catal, 162, 2, pp. 179-189, (1996)

[40]

Guisnet M., Alvarez F., Giannetto G., Perot G., Hydroisomerization and Hydrocracking of n-Heptane on the Zeolites. Effect of the Porosity and of the Distribution of Metallic and Acid Sites, Catal. Today, 1, (1987)

← 1 2 3 4 5 →