Three-dimensional numerical of the asynchronous movement characteristics of flood and sediment peaks in the Three Gorges Reservoir

被引：0

作者：

Zhang B. ^{[1
]}

Wu B. ^{[1
]}

Zhang R. ^{[1
]}

机构：

[1] State Key Laboratory of Hydroscience and Engineering, Tsinghua University, Beijing

来源：

Wu, Baosheng (baosheng@tsinghua.edu.cn) | 1600年 / International Research and Training Center on Erosion and Sedimentation and China Water and Power Press卷 / 32期

基金：

中国国家自然科学基金;

关键词：

Flood peak; Lag time; Sediment concentration; Sediment peak; Three Gorges Reservoir;

D O I：

10.14042/j.cnki.32.1309.2021.03.009

中图分类号：

学科分类号：

摘要：

After the impoundment of the Three Gorges Reservoir, the increase of water depth caused the increase of the lag time of the sediment peak behind the flood peak in the flood propagation. The asynchronous movement characteristics between the flood and sediment peaks can be utilized to conduct the sediment peak regulation, one of the crucial measures to reduce the reservoir sedimentation. The three-dimensional numerical model named SCHISH (Semi-implicit Cross-scale Hydroscience Integrated System Model) was adopted to study the asynchronous movement characteristics of the flood and sediment peaks in the Three Gorges Reservoir. The reliability and accuracy of the model were verified by comparing the water and sediment transport during the flood season in 2013, then the asynchronous movement characteristics of the flood and sediment peaks under different impounded levels were preliminarily analyzed based on the model results. The results showed that the numerical model could accurately simulate the long-distance propagation of the flood and sediment peaks. The impounded level in front of the dam had little influence on the propagation time of the flood peak, but had a significant effect on the propagation time of the sediment peak. The increase of the impounded level resulted in the decrease of the flow velocity and the sand-carrying capacity, so the propagation speed of the sediment peak was slower and the sediment peak value was smaller, which led to the longer lag time of the sediment peak behind the flood peak along the reservoir. The research results can provide scientific evidence for further optimization of the operation of the sediment peak regulation in the Three Gorges Reservoir. © 2021, Editorial Board of Advances in Water Science. All right reserved.

引用

页码：408 / 417

页数：9

共 18 条

[1]

CHEN J., An approach on flood control strategy in middle and lower reaches of Yangtze River after the completion of the Three Gorges Dam project, Advances in Water Science, 25, 5, pp. 745-751, (2014)

[2]

ZHENG S R., Reflections on the Three Gorges Project since its operation, Engineering, 2, 4, pp. 389-397, (2016)

[3]

DONG B J, QIAO W, XU Q X., Study on sediment peak regulation of Three Gorges Reservoir in flood season and preliminary practice, Yangtze River, 45, 3, pp. 7-11, (2014)

[4]

DONG B J, CHEN X W, XU Q X., Investigations and considerations on peak sediment regulation of Three Georges Reservoir, Yangtze River, 45, 19, pp. 1-5, (2014)

[5]

HUANG R Y., Study on the sediment transport and sediment operation of cascade reservoirs in the Upper Changjiang River, (2016)

[6]

ZHANG D J, DONG B J, YANG X, Et al., Research on sediment peak movement characteristics in Three Gorges Reservoir, Yangtze River, 49, 2, pp. 23-28, (2018)

[7]

REN J Q, ZHAO M D, ZHANG W, Et al., Impact of the construction of cascade reservoirs on suspended sediment peak transport variation during flood events in the Three Gorges Reservoir, Catena, 188, (2020)

[8]

ZHANG X F, XU S, LU X H, Et al., Hysteresis and dispersion in one dimensional suspended sediment transport equation, Journal of Sediment Research, 4, pp. 8-15, (2018)

[9]

XIA J Q, ZHANG X L, DENG S S, Et al., Modelling of hyperconcentrated floods in the Lower Yellow River using a coupled approach, Advances in Water Science, 26, 5, pp. 686-697, (2015)

[10]

LU Y J, WANG Z Y., 3-D numerical simulation for water flows and sediment deposition in dam areas of the Three Gorges Project, Journal of Hydraulic Engineering, 135, 9, pp. 755-769, (2009)

← 1 2 →