Influence of TIG Welding Parameters on the Mechanical Properties of Inconel 600 Alloy

被引：0

作者：

Arora R. ^{[1
]}

Kapoor J. ^{[2
]}

机构：

[1] Dept. of Mech. Engg, IKG Punjab Tech. University, Punjab, Kapurthala

[2] Dept. of Mech. Engg., G.N.D Engg. College, Punjab, Ludhiana

来源：

International Journal of Vehicle Structures and Systems | 2022年 / 14卷 / 02期

关键词：

Fractrography; Inconel; 600; Mechanical testing; Microhardness; TIG welding; X-ray diffraction;

D O I：

10.4273/IJVSS.14.2.22

中图分类号：

学科分类号：

摘要：

The present study investigates the effect of TIG welding on the mechanical properties of Inconel 600 alloy. Inconel 600 alloy was welded using TIG welding. Accordingly, the samples were prepared for characterization and testing. Samples were prepared for X-ray diffraction (XRD), optical microscopy, scanning electron microscopy (SEM), microhardness testing and tensile testing. XRD analysis of the welded joint revealed the formation of different intermetallic compounds at the welded joints. These intermetallic joints improved the mechanical properties of the welded joints. Next, optical microscopy and SEM of the welded joints revealed minimal porosity at the welded joints. The lower porosity at the welded joints improved the mechanical properties of the welded joints. Microhardness analysis revealed that the hardness of the weld joint was higher than that of the heat-affected zone (HAZ) and was lower to the base Inconel 600 alloy. Further, the yield strength (YS), ultimate tensile strength (UTS), and % elongation of the TIG welded Inconel 600 joints was higher than the base Inconel 600 alloy. The YS, UTS, and % elongation of TIG welded Inconel joint was 9%, 15% and 22% higher than the base Inconel 600 alloy respectively. Fracture analysis of the joints revealed a dimple type of structure indicating a ductile type of failure. © 2022. MechAero Foundation for Technical Research & Education Excellence.

引用

页码：267 / 272

页数：5

共 26 条

[1]

Chen H.C., Pinkerton A.J., Li L., Fibre laser welding of dissimilar alloys of Ti-6Al-4V and Inconel 718 for aerospace applications, Int. J. Advanced Manufacturing Tech, 52, 9, pp. 977-987, (2011)

[2]

Mavrigian M., Performance exhaust systems: How to design, fabricate, and install? CarTech Inc, (2014)

[3]

Rai S.K., Kumar A., Shankar V., Jayakumar T., Rao K.B., Raj B., Characterization of microstructures in Inconel 625 using X-ray diffraction peak broadening and lattice parameter measurements, Scriptamaterialia, 51, 1, pp. 59-63, (2004)

[4]

Shankar V., Rao K.B., Mannan S.L., Microstructure and mechanical properties of Inconel 625 superalloy, J. Nuclear Materials, 288, 2-3, pp. 222-232, (2001)

[5]

Kah P., Martikainen J., Current trends in welding processes and materials: improve in effectiveness, Rev. Adv. Material Sci, 30, 2, pp. 189-200, (2012)

[6]

Mehta K., Gupta M., Sharma P., Nanomachining, nano-joining, and nano-welding, Micro and precision manufacturing, Micro & Precision Mfg, pp. 71-86, (2018)

[7]

Srivastava A.K., Sharma A., Advances in joining and welding technologies for automotive and electronic applications, American J. Mat. Engg. & Tech, 5, 1, pp. 7-13, (2017)

[8]

Kumar K., Kalita H., Zindani D., Davim J.P., Welding materials and manufacturing processes, Micro & Precision Mfg, pp. 65-81, (2019)

[9]

Li W., Vairis A., Preuss M., Ma T., Linear and rotary friction welding review, Int. Mat. Reviews, 61, 2, pp. 71-100, (2016)

[10]

Yunlian Q., Ju D., Quan H., Liying Z., Electron beam welding, laser beam welding and gas tungsten arc welding of titanium sheet, Materials Sci. and Engg, 280, 1, pp. 177-181, (2000)

← 1 2 3 →