The heat treatment impact on material properties of 34CrNiMo6 steel

被引：0
|
作者：
Janeková M. [1 ]
Koštialiková D. [1 ]
Dubec A. [1 ]
Burget M. [1 ]
Pešlová F. [1 ]
机构：
[1] Faculty of Industrial Technology in Púchov, Alexander Dubček University of Trenčín, I. Krasku 491/30, Púchov, Púchov
来源：
Manufacturing Technology | 2018年 / 18卷 / 06期
关键词：
Fracture; Heat treatment; Melt; Microstructure; Steel;
D O I：
10.21062/ujep/200.2018/a/1213-2489/mt/18/6/912
中图分类号：
学科分类号：
摘要：
An article deals with the assessment of the heat treatment of the material for a particular machine component. This material is 34CrNiMo6, made of two melts. This steel belongs to a group of materials with special properties for working at higher temperatures and for the production of demanding components, turbine wheels, cardan shafts, toothed wheels. The material was evaluated for microstructure quality before and after heat treatment. Based on metallographic microstructures, it is possible to review the heat treatment mode, which subsequently affects the mechanical properties of the components. For a particular design element, better cast material was recommended based on a comprehensive evaluation. © 2018. Published by Manufacturing Technology.
引用
收藏
页码：912 / 916
页数：4
相关论文
共 50 条
  • [1] Heat treatment of 34CrNiMo6 steel used for mooring shackles
    J. Cochet
    S. Thuillier
    T. Loulou
    N. Decultot
    P. Carré
    P.-Y. Manach
    The International Journal of Advanced Manufacturing Technology, 2017, 91 : 2329 - 2346
  • [2] Heat treatment of 34CrNiMo6 steel used for mooring shackles
    Cochet, J.
    Thuillier, S.
    Loulou, T.
    Decultot, N.
    Carré, P.
    Manach, P.-Y.
    International Journal of Advanced Manufacturing Technology, 2017, 91 (5-8): : 2329 - 2346
  • [3] Heat treatment of 34CrNiMo6 steel used for mooring shackles
    Cochet, J.
    Thuillier, S.
    Loulou, T.
    Decultot, N.
    Carre, P.
    Manach, P. -Y.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 91 (5-8): : 2329 - 2346
  • [4] IMPROVEMENT OF FATIGUE PROPERTIES OF 34CRNIMO6 STEEL BY CONTROLLED THERMOMECHANICAL TREATMENT
    Dzugan, J.
    Novy, Z.
    Konopik, P.
    Motycka, P.
    METAL 2010: 19TH INTERNATIONAL METALLURGICAL AND MATERIALS CONFERENCE, 2010, : 421 - 426
  • [5] Effect of heat treatment on microstructure and mechanical properties of 34CrNiMo6 steel by laser solid forming
    Shi, Shang
    Huang, Chunping
    Liu, Fenggang
    Chen, Wenjing
    Liu, Fencheng
    Xia, Chun
    JOURNAL OF MANUFACTURING PROCESSES, 2022, 78 : 308 - 318
  • [6] Effect of various heat treatments on microstructure and mechanical properties of 34CrNiMo6 steel
    Abd El-Azim, Mohammad E.
    Ghoneim, Mohammad M.
    Nasreldin, Aly M.
    Soliman, Salah
    Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 1997, 88 (06): : 502 - 507
  • [7] Effect of Various Heat Treatments on Microstructure and Mechanical Properties of 34CrNiMo6 Steel
    Abd El-Azim, Mohammad E.
    Ghoneim, Mohammad M.
    Nasreldin, Aly M.
    Soliman, Salah
    International Journal of Materials Research, 1997, 88 (06): : 502 - 507
  • [8] Effect of various heat treatments on microstructure and mechanical properties of 34CrNiMo6 steel
    AbdElAzim, ME
    Ghoneim, MM
    Nasreldin, AM
    Soliman, S
    ZEITSCHRIFT FUR METALLKUNDE, 1997, 88 (06): : 502 - 507
  • [9] DEVELOPMENT OF BANDED MICROSTRUCTURE IN 34CrNiMo6 STEEL
    Nagode, A.
    Resnik, A.
    Bizjak, M.
    Kosec, G.
    Karpe, B.
    Budak, I.
    Kosec, B.
    Zorc, B.
    METALURGIJA, 2016, 55 (03): : 329 - 332
  • [10] Microstructure and mechanical properties of 34CrNiMo6 steel repaired by laser remelting
    Liang, Renyu
    Huang, Chunping
    Hao, Hongwei
    Liu, Fenggang
    Liu, Fencheng
    Song, Menghua
    Ke, Liming
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (06): : 13870 - 13878
12345