Calculation of Optical Transfer Function for Image Motion Based on Statistical Moments

被引：0

作者：

Tian L. ^{[1
,2
]}

Wang T. ^{[1
]}

Zhao H. ^{[1
]}

Liu Y. ^{[1
]}

Zhao J. ^{[1
]}

Zhou Y. ^{[1
]}

Liu Z. ^{[1
]}

机构：

[1] Testing Technology Service Center, Xi'anInstitute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an, 710119, Shaanxi

[2] University of Chinese Academy of Sciences, Beijing

来源：

Guangxue Xuebao/Acta Optica Sinica | 2017年 / 37卷 / 12期

关键词：

Image motion; Imaging systems; Optical transfer function; Stabilized platform; Statistical moments; Tracking stabilization;

D O I：

10.3788/AOS201737.1211002

中图分类号：

学科分类号：

摘要：

In order to evaluate the influence of the tracking and imaging platform on the modulation transfer function of the image accurately and provide a theoretical basis for the determination of the platform's technical specifications, an analytical and numerical model is established, which is used to calculate the movement optical transfer function by the image motion function. The truncation error of the finite term is given, and the truncation error is less than 10% when the 7 order approximation is taken. The proposed model includes analytic expressions of low frequency sinusoidal motion and high frequency sinusoidal motion. The tracking angular velocity errors of a tracking imaging platform are analyzed by frequency spectrum. The fundamental components of frequency spectrum are composed by multiple low frequency sinusoidal vibration components. Image motion caused by the tracking angular velocity error can be approximated to uniform linear motion at the exposure time scale. The modulation transfer function is calculated by the statistical moment method, and is almost equal to that calculated by the root mean square of the tracking angular velocity error. The calculated deviation is less than 0.01 at 200 mrad-1 frequency. Therefore, the root mean square error of the tracking angular velocity is a reasonable parameter describing the tracking stability of the tracking imaging platform. © 2017, Chinese Lasers Press. All right reserved.

引用

共 23 条

[1]

Hadar O., Dror I., Kopeika N.S., Image resolution limits resulting from mechanical vibration. Part IV: Real-time numerical calculation of optical transfer functions and experimental verification, Optical Engineering, 32, 2, pp. 566-578, (1994)

[2]

Hadar O., Fisher M., Kopeika N.S., Image resolution limits resulting from mechanical vibrations. Part Ⅲ: Numerical calculation of modulation transfer functions, Optical Engineering, 31, 3, pp. 581-589, (1992)

[3]

Qian Y., Liang W., Gao X., Numerical analysis of dynamic modulation transfer function for high-resolution aerial camera, Acta Optica Sinica, 29, 1, pp. 192-196, (2009)

[4]

Pittelkau M.E., Mckinley W.G., Optical transfer functions, weighting functions, and metrics for images with two-dimensional line-of-sight motion, Optical Engineering, 55, 6, (2016)

[5]

Hadar O., Dror I., Kopeika N.S., Numerical calculation of image motion and vibration modulation transfer functions-a new method, SPIE, 1533, pp. 61-74, (1991)

[6]

Du Y., Ding Y., Xu Y., Et al., Dynamic modulation transfer function analysis and research under sinusoidal vibration, Acta Optica Sinica, 35, 7, (2015)

[7]

Wulich D., Kopeika N.S., Image resolution limits resulting from mechanical vibrations, Optical Engineering, 26, 6, pp. 529-533, (1987)

[8]

Rudoler S., Hadar O., Kopeika N.S., Image resolution limits resulting from mechanical vibrations. Part 2: Experiment, Optical Engineering, 30, 5, pp. 577-589, (1991)

[9]

Hadar O., Dror I., Kopeika N.S., Real-time numerical calculation of optical transfer function for image motion and vibration. Part 1: Experimental verfication, SPIE, 1971, pp. 412-435, (1992)

[10]

Xu P., Huang C., Wang Y., Et al., Modulation transfer function in push-broom camera limits resultingfrom mechanical vibration, Journal of Astronautics, 24, 3, pp. 259-263, (2003)

← 1 2 3 →