Optimization of quenching parameters for hot stamping boron steel B1500HS based on response surface methodology

被引：6

作者：

He L. ^{[1
]}

Zhao G. ^{[1
]}

Li H. ^{[1
]}

Xiang N. ^{[1
]}

机构：

[1] Key Laboratory for Liquid-Solid Structure Evolution and Processing of Materials, Shandong University

来源：

Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2011年 / 47卷 / 08期

关键词：

Hot forming; Optimization; Quenching; Response surface methodology;

D O I：

10.3901/JME.2011.08.077

中图分类号：

学科分类号：

摘要：

Hot stamping of ultra high-strength steels (UHSS) is a new and complex forming technology integrating metal hot forming and quenching process. In order to research the effect of austenitizing temperature and holding time on the quenching hardness, tensile strength and elongation of boron steel B1500HS, the orthogonal experiment design of two factors and five levels is carried out by using the austenitizing temperature and holding time as the design factors. Some samples of B1500HS are quenched according to the results of orthogonal experiment, the quenching hardness, tensile strength and elongation of samples are measured by using the Rockwell hardness tester and the electronic tensile testing machine. The cubic response surface models of quenching hardness, tensile strength and elongation are obtained by using the regression analysis prediction method and the results of experiment. The austenitizing temperature and holding time are optimized according to the cubic response surface model, the optimum quenching parameters are gained. The optimization results of single objective show that the predicted maximum value of quenching hardness is 52.3 HRC, the predicted maximum value of tensile strength is 1658.94 MPa, and the predicted maximum value of elongation is about 8.80%. The optimization results of multi-objectives show that the predicted values of quenching hardness, tensile strength and elongation are not less than 50.6 HRC, 1639.98 MPa and 8.6% respectively when the austenitizing temperature is 916.19~920.48°C and the holding time is 0 min. © 2011 Journal of Mechanical Engineering.

引用

页码：77 / 82

页数：5

共 10 条

[1]

Khan S.H., Ahmed M.S., Ali F., Et al., Investigation of high strength steel bending, Engineering Failure Analysis, 16, 1, pp. 128-135, (2009)

[2]

Hoffmann H., So H., Steinbeiss H., Design of hot stamping tools with cooling system, CIRP Annals-Manufacturing Technology, 56, 1, pp. 269-272, (2007)

[3]

Bariani P.F., Bruschi S., Ghiotti A., Et al., Testing formability in the hot stamping of HSS, CIRP Annals-Manufacturing Technology, 57, 1, pp. 265-268, (2008)

[4]

Lin J., Wang L., Tian H., Et al., Research on hot forming behavior of ultrahigh strength steel, Journal of Plasticity Engineering, 16, 2, pp. 180-183, (2009)

[5]

Min J., Lin J., Tian H., Et al., Investigation on uniaxial tensile instability of usibor1500 steel sheets at elevated temperature, Chinese Journal of Mechanical Engineering, 23, 1, pp. 94-99, (2010)

[6]

Naderi M., Durrenberger L., Molinari A., Et al., Constitutive relationships for 22MnB5 boron steel deformed isothermally at high temperatures, Materials Science and Engineering A, 478, 1-2, pp. 130-139, (2008)

[7]

Tekkaya A.E., Karbasian H., Homberg W., Et al., Thermo-mechanical coupled simulation of hot stamping components for process design, Computer Aided Engineering, 1, 1, pp. 85-89, (2007)

[8]

Xing Z.W., Bao J., Yang Y.Y., Numerical simulation of hot stamping of quenchable boron steel, Materials Science and Engineering A, 499, 1-2, pp. 28-31, (2009)

[9]

Ma N., Hu P., Yan K., Et al., Research on boron steel for hot forming and its application, Journal of Mechanical Engineering, 46, 14, pp. 68-72, (2010)

[10]

Sun H., Hu P., Ma N., Et al., Application of hot forming high strength steel parts on car body in side impact, Chinese Journal of Mechanical Engineering, 23, 2, pp. 252-256, (2010)

← 1 →