Genetic Algorithm & Fuzzy Logic-based Condition Monitoring of Induction Motor Through Estimated Motor Losses

被引：6

作者：

Ayyappan G.S. ^{[1
,2
]}

Babu B.R. ^{[2
,3
]}

Raghavan M.R. ^{[1
]}

Poonthalir R. ^{[1
]}

机构：

[1] CSIR-Central Scientific Instruments Organisation (CSIR-CSIO), Chennai

[2] Academy of Scientific & Innovative Research, Ghaziabad

[3] CSIR-Central Electro Chemical Research Institute (CSIR-CECRI), Karaikudi

来源：

IETE Journal of Research | 2023年 / 69卷 / 06期

关键词：

Condition monitoring; Equivalent circuit method; Fault diagnosis; Fuzzy logic; Genetic algorithm; IE & NEMA class; Induction motor; Loss distribution; Loss estimation; Performance monitoring;

D O I：

10.1080/03772063.2021.1913075

中图分类号：

学科分类号：

摘要：

In this paper, a novel approach for condition and performance monitoring of induction motor through estimated motor losses is proposed and explained. The novelty in the proposed approach is minimal non-intrusive measurements and does not require disconnection of motors from the load. In many systems, the losses measured directly or indirectly in a motor are of the lump sum in nature. The main advantage of the system prescribed in this paper gives losses in the segregated form, which is directly used to assess the internal condition of the motor. This approach will assess the condition of induction motors for internal faults such as stator faults, rotor faults, core faults, bearings faults, etc. The equivalent circuit parameters and motor losses are estimated using the developed Genetic Algorithm (GA). The estimated motor loss data are compared with the NEMA & IE Standards and if any deviation found will be reported as faults. The reported information is linked to the developed fuzzy algorithm to identify the faults exactly along with its severity level. The proposed approach was tested and evaluated with the help of LT motors ranging from 5 to 200 HP in real-time from a selected industry. © 2023 IETE.

引用

页码：3750 / 3761

页数：11

共 17 条

[1] Selection M.E., (2013)
[2] Tsypkin M., The origin of the electromagnetic vibration of induction motors operating in modern industry: practical experience–analysis and diagnostics, IEEE Trans. Ind. Appl., 53, 2, pp. 1669-1676, (2017)
[3] Wadhwani S., Gupta S.P., Kumar V., Fault classification for rolling element bearing in electric machines, IETE. J. Res., 54, 4, pp. 264-275, (2008)
[4] Mehala N., Dahiya R., Motor current signature analysis and its applications in induction motor fault diagnosis, Int. J. Syst. Appl. Eng. Develop., 2, 1, pp. 29-35, (2007)
[5] Khwaja H.A., Gupta S.P., Kumar V., A statistical approach for fault diagnosis in electrical machines, IETE. J. Res., 56, 3, pp. 146-155, (2010)
[6] Arabaci H., Bilgin O., A simplified algorithm to detect rotor bar faults by using stator current envelope, IETE. J. Res., 59, 3, pp. 264-269, (2013)
[7] Petrov A., Plokhov I., Rassolkin A., Vaimann T., Kallaste A., Belahcen A.
[8] Ayyappan G.S., Venugopal K., Raja Raghavan M., Poonthalir R., Ilango K., Ramesh Babu B.
[9] Han J.Y., Song Y.H., Condition monitoring techniques for electrical equipment–a literature survey, IEEE Trans. Power Delivery, 18, 1, (2003)
[10] Ayyappan G.S., Poonthalir R., Raja Raghavan M., Ramesh Babu B., Srinivas K., Comprehensive study on induction motor condition monitoring techniques and products–a review, Int. J. Adv. Sci. Technol., 29, 9s, pp. 3623-3638, (2020)

← 1 2 →