Effect of HVOF-sprayed bond coat on the oxidation resistance of thermal barrier coating

被引：0
|
作者：
Dong Y. [1 ]
Ren Z. [2 ]
Lin X. [1 ]
Wang Z. [3 ]
Ding K. [3 ]
机构：
[1] Northeastern University at Qinhuangdao
[2] School of Material Science and Engineering, Hebei University of Technology
[3] School of Science, Civil Aviation University of China
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2010年 / 46卷 / 20期
关键词：
High velocity oxygen fuel; High-temperature oxidation; Thermal barrier coating; Thermally grown oxide;
D O I：
10.3901/JME.2010.20.086
中图分类号：
学科分类号：
摘要：
MCrAlY bond coat is deposited onto GH99 high-temperature alloy by using high velocity oxygen fuel technique. The influence of this technique on the oxidation resistance is studied. The experimental results show that lots of sharp-angled and hooked grains exist on the surface of the APS-bond coat, while the surface of HVOF-MCrAlY is relatively smooth and with less internal black oxide. A layer of compact granular oxide forms on the surface of HVOF-MCrAlY after 15 min oxidation, the weight gain of HVOF sample is faster than that of the APS sample in the first 40min oxidation, then becomes slowly, while the APS sample still has high oxidation rate. HVOF sprayed coating of thermally grown oxide(TGO) appears delamination after 300 hours oxidation, TGO layer close to bond coat has dense organization, TGO layer close to top coat has lots of holes and gaps in it. Due to high velocity oxygen fuel technique, time for TGO coming into steady-state oxidation stage is shortened and the period of steady-state oxidation becomes longer. The high temperature oxidation resistance of coating could be improved obviously. © 2010 Journal of Mechanical Engineering.
引用
收藏
页码：86 / 91
页数：5
相关论文
共 10 条
  • [1] Chen W.R., Wu X., Marple B.R., Et al., TGO growth behaviour in TBCs with APS and HVOF bond coats, Surface and Coatings Technology, 202, pp. 2677-2683, (2008)
  • [2] Ajdelsztajn L., Oxidation behavior of HVOF sprayed nanocrystalline NiCrAlY power, Materials Science and Engineering, 338, pp. 33-43, (2002)
  • [3] Zhang L., Lin X., Liu C., Et al., Effect of high-speed fine particles bombarding on thermally grown oxide growth process of thermal barrier coatings, Transactions of Materials and Heat Treatment, 30, 3, pp. 182-186, (2009)
  • [4] Picas J.A., Forna A., Matthhaus G., HVOF coatings as an alternative to hard chrome for pistons and valves, Wear, 216, 5-6, pp. 477-484, (2006)
  • [5] Koutsky J., High velocity oxy-fuel spraying, Journal of Materials Processing Technology, 157-158, pp. 557-560, (2004)
  • [6] Daniel W.P., Gerald L.K., HVOF-spray technology poised for growth, Advanced Materials and Processes, 4, pp. 68-74, (1991)
  • [7] Koutsky J., High velocity oxy-fuel spraying, Journal of Material Processing Technology, 157, pp. 557-560, (2004)
  • [8] Rabiei A., Evans A.G., Failure mechanisms associated with the thermally grown oxide in plasma-sprayed thermal barrier coatings, Acta Materialia, 48, pp. 3963-3976, (2000)
  • [9] Ajdelsztajn L., Picas J.A., Kim G.E., Et al., Oxidation behavior of HVOF sprayed nanocrystalline NiCrAlY powder, Materials Science and Engineering A, 338, pp. 33-43, (2002)
  • [10] Movchan B.A., Functional graded EB-PVD coatings, Surface and Coatings Technology, 149, 2-3, pp. 252-262, (2002)
1