Gait correction algorithm of hexapod walking robot with semi-round rigid feet

被引：4

作者：

Jin, Bo ^{[1
]}

Chen, Cheng ^{[1
]}

Li, Wei ^{[1
]}

机构：

[1] Department of Mechanical Engineering, Zhejiang University

来源：

Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science) | 2013年 / 47卷 / 05期

关键词：

Correction gait; Hexapod robot; Ideal foothold; Kinematic; Semi-round rigid foot;

D O I：

10.3785/j.issn.1008-973X.2013.05.005

中图分类号：

学科分类号：

摘要：

Considered the body misplaced problem caused by the rolling effect of semi-round rigid feet during hexapod robot's walking period, a gait correction algorithm was established. The main benefits of the large radius semi-round structure were proposed, while the rolling effect during the supporting phase was illustrated. The concept of ideal foothold was put forward, with the 3D deviation between the ideal foothold and real foothold deduced by correcting the single leg kinematic model. The forward/inverse kinematic solutions between the ideal foothold and the joints' angular vectors were formulated. The root joint trajectory of single leg generated in simulation environment verifies the effectiveness of the algorithm. A series of walking experiments results show that the correction algorithm could improve the walking orientation deviation problem and the energetic cost obviously by avoiding foot slippage phenomenon as much as possible.

引用

页码：768 / 774

页数：6

共 11 条

[1]

Wettergreen D., Thorpe C., Whittaker R., Exploring Mount Erebus by walking robot, Robotics and Autonomous Systems, 11, pp. 171-185, (1993)

[2]

Mosher R.S., Test and evaluation of walking truck, Cornell Aeronautical Lab/ISTVS Off-road Mobility Research Symposium, (1968)

[3]

Pfeiffer F., Eltze J., Weidemann H.J., The TUM-walking machine, Intelligent Automation and Soft Computing, 1, 3, pp. 307-323, (1995)

[4]

Wardron K.J., Mcghee R.B., The adaptive suspension vehicle, IEEE Control Systems Magazine, pp. 7-12, (1986)

[5]

Ilg W., Albiez J., Jedele H., Et al., Adaptive periodic movement control for the four legged walking machine BISAM, Proceedings of the 1999 IEEE International Conference on Robotics & Automation, pp. 2354-2359, (1999)

[6]

Hirose S., Yokota S., Torii A., Et al., Quadruped walking robot centered demining system-development of TITAN-IX and its operation, Proceedings of the IEEE International Conference on Robotics and Automation, pp. 1296-1302, (2005)

[7]

Galvez J.A., Estremera J., Gonzalez P., A new legged-robot configuration for research in force distribution, Mechatronics, 13, pp. 907-932, (2003)

[8]

Fielding M.R., Damaren C.J., Dunlop R., HAMLET: Force/position control hexapod walker-design and systems, Proceedings of the IEEE Conference on Control Applications, (2001)

[9]

Gonzalez P., Cobano J.A., Garcia E., Et al., A six-legged robot-based system for humanitarian demining missions, Mechatronics, 17, pp. 417-430, (2007)

[10]

Guardabrazo T.A., Jimenez M.A., Gonzalez P., Analysing and solving body misplacement problems in walking robots with round rigid feet, Robotics and Autonomous Systems, 54, pp. 256-264, (2006)

← 1 2 →