Recent advances in green composites

被引：10
作者：
George G. [1 ]
Joseph K. [2 ]
Boudenne A. [3 ]
Thomas S. [4 ]
机构：
[1] Department of Chemistry, S B College, Changanacherry, Kottayam, Kerala
[2] Indian Institute of Space Science and Technology (IIST), ISRO, Thiruvananthapuram
[3] Certes, IUT de Creteil, Universite Paris XII-Val de Marne, 94010 CRETEIL Cedex, 61, Avenue du General de Gaulle
[4] Center for Nanoscience and Nanotechnology, Mahatma Gandhi University, Kottayam, Kerala, Priyadarshini Hills P.O
来源：
Key Engineering Materials | 2010年 / 425卷
关键词：
Biocomposites; Flexural strength; Green composites; Hemp; Interface; Jute; Mechanical properties; Tensile properties; Thermal properties; Thermophysical properties;
D O I：
10.4028/www.scientific.net/KEM.425.107
中图分类号：
学科分类号：
摘要：
This review aims at reporting on very recent developments in the, properties and applications of Green Composites. One very important aspect of green composites is that they can be designed and tailored to meet different requirements. Recent advances in natural fiber development offer significant oppurtunities for improved materials from renewable resources. Biocomposites offer a significant non-food market for crop-derived fibres and resins. Considerable growth has been seen in the use of biocomposites in the automotive and decking markets over the past decade or so, but application in other sectors has hitherto been limited. Recent developments of different biodegradable polymers and biocomposites are discussed in this review article. © (2010) Trans Tech Publications.
引用
收藏
页码：107 / 166
页数：59
相关论文
共 261 条
  • [1] Mohanty A.K., Misra M., Hinrichsen G., Macromol. Mater. Eng, 276-277, (2000)
  • [2] Sain M.M., Imbert C., Kokta B.V., Die Angew Macromol., Chemie, 210, 3588, pp. 33-46, (1993)
  • [3] Sain M.M., Kokta B.V., Polym. -Plast, Technol. Engg, 33, pp. 89-104, (1994)
  • [4] Gassan J., Bledzki A.K., Composites Part A, 28 A, pp. 993-1000, (1997)
  • [5] Mi Y.L., Chen X.Y., Guo Q.P., J. Appl. Polym. Sci, 64, (1997)
  • [6] Hepworth D.G., Hobson R.N., Bruce D.M., Farrant J.W., Composites Part A, 31, pp. 1279-1283, (2000)
  • [7] Albano C., Ichazo M., Gonzalez J., Delgado M., Poleo R., Mat. Res. Innovat, 4, pp. 284-293, (2001)
  • [8] Rajeev K., Mohan K., Ramani N., Polymer Eng. Sci, 37, pp. 476-483, (1997)
  • [9] Woodhams R.T., Thomas G., Rodgers D.K., Poly. Engg. Sci, 24, pp. 1166-1171, (1984)
  • [10] Gatenholm P., Bertilsson H., Mathiasson A., J. Appl. Poly. Sci, 49, pp. 197-208, (1993)
12345678910