Nonlinear control of an autonomous quadrotor unmanned aerial vehicle using backstepping controller optimized by particle swarm optimization

被引:0
作者
Mohd Basri, Mohd Ariffanan [1 ]
Husain, Abdul Rashid [1 ]
Danapalasingam, Kumeresan A. [1 ]
机构
[1] Department of Control and Mechatronics Engineering, Faculty of Electrical Engineering, Universiti Teknologi Malaysia, Skudai, Johor
关键词
Backstepping control; Nonlinear control; Particle swarm optimization; Quadrotor;
D O I
10.25103/jestr.083.05
中图分类号
学科分类号
摘要
Quadrotor unmanned aerial vehicle (UAV) is an unstable nonlinear control system. Therefore, the development of a high performance controller for such a multi-input and multi-output (MIMO) system is important. The backstepping controller (BC) has been successfully applied to control a variety of nonlinear systems. Conventionally, control parameters of a BC are usually chosen arbitrarily. The problems in this method are the adjustment is time demanding and a designer can never tell exactly what are the optimal control parameters should be selected. In this paper, the contribution is focused on an optimal control design for stabilization and trajectory tracking of a quadrotor UAV. Firstly, a dynamic model of the aerial vehicle is mathematically formulated. Then, an optimal backstepping controller (OBC) is proposed. The particle swarm optimization (PSO) algorithm is used to compute control parameters of the OBC. Finally, simulation results of a highly nonlinear quadrotor system are presented to demonstrate the effectiveness of the proposed control method. From the simulation results it is observed that the OBC tuned by PSO provides a high control performance of an autonomous quadrotor UAV. © 2015 Kavala Institute of Technology.
引用
收藏
页码:39 / 45
页数:6
相关论文
共 50 条
  • [21] A wavelet neural control scheme for a quadrotor unmanned aerial vehicle
    Jurado, F.
    Lopez, S.
    PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 2018, 376 (2126):
  • [22] Design of Trajectory Tracking Controller with Backstepping Method for Quadrotor Unmanned Aerial Vehicles
    Shi, Xiaoyu
    Hu, Binyang
    Yin, Chun
    Cheng, Yuhua
    Huang, Xuegang
    PROCEEDINGS OF THE 30TH CHINESE CONTROL AND DECISION CONFERENCE (2018 CCDC), 2018, : 3124 - 3128
  • [23] Autonomous Vehicle Control Using Particle Swarm Optimization in a Mixed Control Environment
    Wiesner, Na'Shea
    Sheppard, John
    Haberman, Brian
    2020 IEEE SYMPOSIUM SERIES ON COMPUTATIONAL INTELLIGENCE (SSCI), 2020, : 2877 - 2884
  • [24] Active anti-disturbance control of a quadrotor unmanned aerial vehicle using the command-filtering backstepping approach
    Aboudonia, Ahmed
    El-Badawy, Ayman
    Rashad, Ramy
    NONLINEAR DYNAMICS, 2017, 90 (01) : 581 - 597
  • [25] Adaptive position control using backstepping technique for the leader-follower multiple quadrotor unmanned aerial vehicle formation
    Song, Xia
    Shen, Lihua
    Chen, Fuyang
    INTERNATIONAL JOURNAL OF ADAPTIVE CONTROL AND SIGNAL PROCESSING, 2024, 38 (09) : 3121 - 3133
  • [26] Active anti-disturbance control of a quadrotor unmanned aerial vehicle using the command-filtering backstepping approach
    Ahmed Aboudonia
    Ayman El-Badawy
    Ramy Rashad
    Nonlinear Dynamics, 2017, 90 : 581 - 597
  • [27] Tracking Control Design for Quadrotor Unmanned Aerial Vehicle
    Nadda, Sudhir
    Swarup, A.
    DEFENCE SCIENCE JOURNAL, 2017, 67 (03) : 245 - 253
  • [28] Robust feedback linearization and GH∞ controller for a quadrotor unmanned aerial vehicle
    Mokhtari, A
    Benallegue, A
    Daachi, B
    2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, Vols 1-4, 2005, : 1009 - 1014
  • [29] Quaternion-based Nonlinear Trajectory Tracking Control of a Quadrotor Unmanned Aerial Vehicle
    ZHA Changliu
    DING Xilun
    YU Yushu
    WANG Xueqiang
    Chinese Journal of Mechanical Engineering, 2017, 30 (01) : 77 - 92
  • [30] Quaternion-based nonlinear trajectory tracking control of a quadrotor unmanned aerial vehicle
    Changliu Zha
    Xilun Ding
    Yushu Yu
    Xueqiang Wang
    Chinese Journal of Mechanical Engineering, 2017, 30 : 77 - 92