Research on ultrasonic testing of plate weld flaw based on NLFM Barker coded excitation method

被引：0

作者：

Song S. ^{[1
]}

Qiao M. ^{[1
]}

机构：

[1] Department of Instrument Science and Engineering, Jiangsu University, Zhenjiang

来源：

Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument | 2020年 / 41卷 / 04期

关键词：

Composite coded ultrasonic excitation; Non-linear frequency modulation (NLFM); Ultrasonic; Weld defect;

D O I：

10.19650/j.cnki.cjsi.J2006070

中图分类号：

学科分类号：

摘要：

The coded ultrasonic testing has the problem of long duration of main-lobe and high level of side-lobe after pulse compression. To solve this issue, a composite coded ultrasonic excitation technique based on the non-linear frequency modulation Barker is proposed, which is applied in the plate weld flaw detection. The generation method of the proposed composite code is presented and its mathematical model is deduced. The time-frequency performance, the transducer response, and the pulse compression performance have been researched and simulated, which are compared with other coded signal excitation method, such as Barker, non-linear frequency modulation signal, and linear frequency modulation Barker. Compared with the non-linear frequency modulation signal and linear frequency modulation Barker, experimental results show that the power ratio of main-lobe to side-lobe is increased about 11 and 5 dB, respectively. Compared with Barker code, non-linear frequency modulation signal, and linear frequency modulation Barker code, the level of peak side-lobe is reduced about 7.8, 7, and 3.6 dB, respectively. The composite coded ultrasonic signal can effectively detect the common five types of defects on a steel plate weld sample. © 2020, Science Press. All right reserved.

引用

页码：246 / 254

页数：8

共 30 条

[1]

HU H W, ZHANG J, PENG G, Et al., Classification of defects in ultrasonic detection of welds based on LBP-KPCA feature extraction, Transactions of the China Welding Institution, 40, 6, pp. 34-39, (2019)

[2]

XING H Y, CHEN Y H, LI X F, Et al., Hierarchical magnetic memory recognition model of metal weld defect based on dynamic immune fuzzy clustering, Chinese Journal of Scientific Instrument, 40, 11, pp. 225-232, (2019)

[3]

ZHANG H, SONG Y N, WANG Y N, Et al., Summary of non-destructive testing and evaluation techniques for rail defects, Chinese Journal of Scientific Instrument, 40, 2, pp. 11-25, (2019)

[4]

GE W M, SHEN Y H, WANG X F., Feature extraction and classification of weld surface defects in box girder structures, Chinese Journal of Scientific Instrument, 39, 12, pp. 207-215, (2018)

[5]

CHEN CH L., Research on the application of ultrasonic detection in multi-form weld defect recognition, (2018)

[6]

YIN Y, CHEN ZH H, XIAO F, Et al., Non-linear ultrasonic testing method for fatigue microdamage of stainless steel, Journal of Electronic Measurement and Instrument, 34, 1, pp. 68-73, (2020)

[7]

DEQIANG Z, XIANG C, YAN D U, Et al., Research on the crack detection of conductive components using pulsed eddy current thermography, Instrumentation, 4, 3, pp. 59-68, (2017)

[8]

LEETANG K, HIRATA S, HACHIYA H., Selection on the combination of M-sequence codes in alternate transmission for extension of measurable distance, Japanese Journal of Applied Physics, 58, 7, (2019)

[9]

SHI Q, LIU J, LIU W, Et al., Barker-coded modulation laser thermography for CFRP laminates delamination detection, Infrared Physics & Technology, 98, pp. 55-61, (2019)

[10]

FAN Z, RUDLIN J, ASFIS G, Et al., Convolution of Barker and Golay codes for low voltage ultrasonic tes-ting, Technologies, 7, 4, (2019)

← 1 2 3 →