Combustion synthesized macroporous structure MFe2O4(M= Zn, Co) as anode materials with excellent electrochemical performance for lithium ion batteries

被引：0

作者：

Liu, Jiaming ^{[1
]}

Xiao, Jie ^{[1
]}

Zeng, Xiaoyuan ^{[1
]}

Dong, Peng ^{[1
]}

Zhao, Jinbao ^{[2
]}

Zhang, Yingjie ^{[1
]}

Li, Xue ^{[1
]}

机构：

[1] The Engineering Laboratory of Advanced Battery and Materials of Yunnan Province, Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming,650093, China

[2] State Key Laboratory of Physical Chemistry of Solid Surfaces, Department of Chemistry, College of Chemistry and Chemical Engineering, China

来源：

Journal of Alloys and Compounds | 2017年 / 699卷

关键词：

D O I：

暂无

中图分类号：

学科分类号：

摘要：

ZnFe2O4and CoFe2O4materials are successfully prepared via solution combustion synthesis with glycine as fuel and complexing agent. The final products are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The average diameter of the prepared particles is in the range of 80–100 nm. Cyclic voltammetry (CV), galvanostatic cycling and electrochemical impedance spectroscopy (EIS) studies are used to investigate the electrochemical properties of the MFe2O4(M = Zn, Co) particles. The reversible capacities of ZnFe2O4and CoFe2O4are 1037.2 mAh g−1and 994.3 mAh g−1, respectively, after 80 cycles at a current density of 200 mA g−1. The capacity retentions are up to 104.2% and 106.6% compared to the second cycle. The as-synthesized samples also exhibit outstanding rate capability and long cycle life. After 300 cycles at a high current density of 1000 mA g−1, the capacity retention are 109.3% and 87.4% compared to the second cycle with almost no capacity fading but increasing. It could still maintain reversible capacities of 794.7 mAh g−1and 746.5 mAh g−1, respectively. The superior electrochemical performance can be attributed to the macroporous structure in pure phase without any impurities, which can not only ease the volume expansion during the charge/discharge processes but also provide more interstices for lithium ions insertion. What is more, the high crystallinity of two samples is able to stabilize the microstructure no collapse after plenty of lithiation-delithiation processes. The results suggest that this method is a facile, effective and general way to synthesize excellent electrochemical properties of macroporous structure spinel Fe-based binary transition metal oxides as anode material for lithium ion batteries. © 2016 Elsevier B.V.

引用

页码：401 / 407