Methane catalytic combustion over flame spray pyrolysis-synthesized Pd-Pt/CeO2 catalyst

被引:0
|
作者
Wu L. [1 ]
Wang Y. [2 ]
Chen Z. [3 ,4 ]
Tian Q. [3 ,4 ]
Wang L. [1 ]
Fu Z. [1 ]
Zhao N. [5 ]
Wang X. [1 ]
Huang X. [1 ]
机构
[1] College of Safety and Emergency Management Engineering, Taiyuan University of Technology, Taiyuan
[2] Shanxi Lu’an Chemical Group Co., Ltd., Changzhi
[3] State Key Laboratory of Coal and CBM Co-mining, Jincheng
[4] Jinneng Holding Equipment Manufacturing Group Co., Ltd., Jincheng
[5] Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan
基金
中国国家自然科学基金;
关键词
flame spray pyrolysis; impregnation; methane combustion; palladium; stability;
D O I
10.19906/j.cnki.JFCT.2023083
中图分类号
学科分类号
摘要
Flame spray pyrolysis (FSP) is a versatile, rapid, and scalable preparation technique for the nanocatalysts. CeO2 and Pt-CeO2 carriers, Pd-Pt-CeO2 catalyst were synthesized by flame spray pyrolysis, and then Pd-Pt bimetallic catalysts were prepared by impregnation method, and as-obtained Pd-Pt catalysts were tested in the methane combustion. The physicochemical properties of the catalysts were characterized by ICP, XRD, TEM, BET, H2-TPR, XPS, and Raman. TEM results showed that Pd and Pt species were highly dispersed in CeO2 carriers in Pd-Pt/CeO2 catalysts. Compared with the Pd-Pt-CeO2(OS-FSP) catalyst prepared by one-step flame spray pyrolysis, the catalytic activity of the Pd-Pt/CeO2(0.25)-WI prepared by co-impregnation was higher, with its t50 reduced by 60 ℃, and no deactivation was seen for 60 h. It is attributed to the fact that the Pd-Pt/CeO2(0.25)-WI catalyst has a higher molar ratio of Pd0/Pd2+ and Ce3+/Ce4+ on the surface of the catalyst and more lattice oxygen, resulting in an excellent performance during the methane combustion. © 2024 Science Press. All rights reserved.
引用
收藏
页码:725 / 734
页数:9
相关论文
共 39 条
  • [1] MURATA K, KOSUGE D, OHYAMA J, Et al., Exploiting metal-support interactions to tune the redox properties of supported Pd catalysts for methane combustion[J], ACS Catal, 10, pp. 1381-1387, (2019)
  • [2] LI T, YAO Y, HUANG Z, Et al., Denary oxide nanoparticles as highly stable catalysts for methane combustion[J], Nat Catal, 4, (2021)
  • [3] HUANG Xin, JIAO Xi, HUANG Guobao, Et al., Research progress on Pd-based catalysts for methane catalytic combustion, Low-Carbon Chem Chem Eng, 48, pp. 147-154, (2023)
  • [4] PENG S, LIN X, THOMPSON R L, Et al., Wetland emission and atmospheric sink changes explain methane growth in 2020[J], Nature, 612, pp. 477-482, (2022)
  • [5] KHOLOD N, EVANS M, PILCHER R C, Et al., Global methane emissions from coal mining to continue growing even with declining coal production[J], J Clean Prod, 256, (2020)
  • [6] YASUMURA S, SAITA K, MIYAKAGE T, Et al., Designing main-group catalysts for low-temperature methane combustion by ozone[J], Nat Commun, 14, (2023)
  • [7] FENG X, JIANG L, LI D, Et al., Progress and key challenges in catalytic combustion of lean methane[J], J Energy Chem, 75, pp. 173-215, (2022)
  • [8] HOU Z, DAI L, DENG J, Et al., Electronically engineering water resistance in methane combustion with an atomically dispersed tungsten on PdO catalyst[J], Angew Chem Int Ed, 61, (2022)
  • [9] LIU Z, XU G, ZENG L, Et al., Anchoring Pt-doped PdO nanoparticles on γ-Al2O3 with highly dispersed La sites to create a methane oxidation catalyst[J], Appl Catal B: Environ, 324, (2023)
  • [10] WANG X, ZHANG X, CAO M, Et al., Ordered mesoporous Pd-La/Al2O3 catalysts for enhanced methane combustion[J], Energy Fuels, 36, pp. 6999-7005, (2022)