Design of cavity shape for a new thin slab continuous casting mold

被引：0
作者：
College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, China [1 ]
不详 [2 ]
机构：
[1] College of Mechanical Engineering, Yanshan University
[2] China National Heavy Machinery Research Institute
来源：
Jixie Gongcheng Xuebao | 2009年 / 11卷 / 271-276期
关键词：
Curvature; Curvature variation rate; Funnel mold; Thin slab continuous casting;
D O I：
10.3901/JME.2009.11.271
中图分类号：
学科分类号：
摘要：
Because strain rate has an main influence on critical strain of shell in the mold, the increase or sudden change of strain rate makes critical strain decrease, the strain rate of shell must be controlled. Considering the shrinkage characteristic of solidified shell in the thin slab continuous casting mold, a new thin slab continuous casting funnel mold is developed. In the new mold, funnel curve curvature varies continuously, the curvature variation is small and constant, and the shell strain rate does not suddenly change. The funnel curve reaches G2 continuity. The expressions of horizontal and vertical curve in funnel area are given. Considering solidified shell shrinkage and deformation, the self-developed computation code is used to construct the funnel curved surface. The stress distribution of wide face shell is solved by a thermo-mechanical coupled model. Compared with import technology, the result indicates that the stress of wide face shell in mold decreases 20%, especially the stress decreases 35% at the area of cracking susceptibility. The possibility of cracking is reduced effectively and the quality of thin slab is improved in the new mold.
引用
收藏
页码：271 / 276
页数：5
相关论文
共 12 条
  • [1] Tian N., Thin Slab Casting and Rolling, (2004)
  • [2] Zhang J., Pan G., Yang Z., Equipment and Production Technology for Thin-Slab Continuous Casting, (2007)
  • [3] Gan Y., On processing technologies of thin slab casting and rolling production line, Iron and Steel, 39, 8, pp. 24-33, (2004)
  • [4] Streubel H., Mold for continuously casting steel strip, (1989)
  • [5] Streubel H., Mold for continuously casting steel strip, (1994)
  • [6] Liu L., Zhang H., Gan Y., Et al., Analysis of metal deformation in funnel-shaped mould, Continuous Casting, 4, (2001)
  • [7] Sheng Y., Zhao J., Design of funnel curved surface of funnel-shaped mold, Iron and Steel, 33, 3, (1998)
  • [8] Han J., Wu J., Zhang R., Et al., An ideal inner curved surface of the mould for thin slab caster, Heavy Machinery, 5, pp. 35-38, (2005)
  • [9] Meek D.S., Walton D.J., The use of cornu spirals in drawing planar curves of controlled curvature, Journal of Computational and Applied Mathematics, 25, pp. 69-78, (1989)
  • [10] Zhu Z., Xiao W., Li X., Et al., Study on modeling and simulating of thermomechanical coupling in roll-casting process, Chinese Journal of Mechanical Engineering, 38, 7, pp. 153-158, (2002)
12