Preparation of aragonite-rich whisker materials from magnesium slag and salt lake bischofite and its effects on cement properties

This study develops an innovative wet carbonation process utilizing Magnesium Slag (MS), Salt Lake Bischofite (SLB), and CO2 to prepare carbonized materials mainly composed of aragonite and active silica gel, all raw materials were solid wastes. Subsequently, it was employed as Supplementary Cementitious Materials (SCMs) additive in cement, with the goal of efficiently capturing carbon dioxide and transforming aragonite whiskers into high-value products. Investigated the parameters influencing the formation of aragonite, including temperature and the concentration of the SLB solution, while exploring the nucleation and growth mechanisms of aragonite. The findings reveal that under 80 degrees C, the suspension of MS with 0.83 % SLB solution swiftly produces needle-like aragonite whiskers with single crystal lengths ranging from 10-20 mu m and diameters of 0.3-0.5 mu m. With the increase in SLB concentration, the aspect ratio of aragonite whiskers decreases. Additionally, highly polymerized amorphous silica gel was also detected. Therefore, Carbonated Aragonite-type Magnesium Slag (CAMS) (34.0901 m2/g) exhibits a significantly larger specific surface area compared to MS (0.9877 m2/g), representing an enhancement factor of 34.5 times, which concurrently bolsters its capability to adsorb reactive ions. During the carbonation process, 1 g of MS can sequester and solidify 0.403 g of CO2. Furthermore, incorporating CAMS as SCMs into cement mixtures notably enhances both the compressive and flexural strengths of cement mortar. These findings offer a sustainable approach to the recycling of solid waste, CO2 sequestration, and the improvement of cement-based material properties.