EFFECT OF LOOP LENGTH ON THERMAL COMFORT PROPERTIES OF MESH KNITTED FABRICS

被引：0

作者：

Ozkan E.T. ^{[1
]}

Kaplangìray B. ^{[2
]}

机构：

[1] Bitlis Eren University, Fine Arts Faculty, Textile and Fashion Design Department, Bitlis

[2] Uludag University, Engineering Faculty, Textile Engineering Department, Bursa

来源：

Tekstil ve Muhendis | 2020年 / 27卷 / 120期

关键词：

loop length; mesh knitting; moisture comfort; thermal comfort;

D O I：

10.7216/1300759920202712004

中图分类号：

学科分类号：

摘要：

In this study, it is aimed to change the loop length of knitted fabrics with a mesh structure and to investigate the effect of loop length differences on thermal and moisture transmission properties. For this purpose, six fabrics with different loop lengths were produced in two different knittings and yarn types. Thermal conductivity, thermal absorptivity, thermal resistance, air permeability and moisture management properties of these fabrics were measured according to standard test methods. The results showed that as the yarn gets finer and loop length increases, the air permeability values will increase. It was observed that as the loop length increase, the overall moisture management capacity (OMMC) and thermal absorptivity of the fabrics will decrease. The thermal resistance values of two ply textured polyester mesh knitted fabrics decreased with increasing density and the highest loop length two ply textured polyester mesh knitted fabric showed the highest thermal resistance value. © 2020. Journal of Textiles and Engineer. All Rights Reserved.

引用

页码：243 / 251

页数：8

共 34 条

[1]

Chidambaram P., The effect of loop length and yarn linear density on the thermal properties of bamboo knitted fabric, AUTEX Research Journal, 11, 4, pp. 102-105, (2011)

[2]

Spencer DJ., Knitting Technology, (2001)

[3]

Ozdil N., Marmarah A., Donniez Kretzschmar S., Effect of yarn properties on thermal comfort of knitted fabrics, International Journal of Thermal Sciences, 46, 12, pp. 1318-1322, (2007)

[4]

Oner E., Atasagun H.G., Okur A., Beden A.R., Durur G., Evaluation of moisture management properties on knitted fabrics, The Journal of The Textile Institute, 104, 7, pp. 699-707, (2013)

[5]

Coruh E., Optimization of Comfort Properties of Single Jersey Knitted Fabrics, Fibres & Textiles in Eastern Europe, 23, 4, pp. 66-72, (2015)

[6]

Ozkan TE., Kaplangiray B., Investigating thermophysiological comfort properties of polyester knitted fabrics, Journal of Textile Engineering & Fashion Technology, 5, 1, pp. 50-56, (2019)

[7]

Varshney R.K., Kothari V.K., Dhamija S., A study on thermophysiological comfort properties of fabrics in relation to constituent fibre fineness and cross-sectional shapes, The Journal of The Textile Institute, 101, 6, pp. 495-505, (2010)

[8]

Manshahia A., Das A., Thermophysiological comfort characteristics of plated knitted fabrics, The Journal of The Textile Institute, 105, 5, pp. 509-519, (2014)

[9]

Sampath M.B., Mani S., Nalankilli G., Effect of filament fineness on comfort characteristics of moisture management finished polyester knitted fabrics, Journal of Industrial Textiles, 41, 2, pp. 160-173, (2011)

[10]

Jhanji Y., Gupta D., Kothari V.K., Comfort properties of plated knitted fabrics with varying fibre type, Indian Journal of Fibre & Textile Research, 40, 1, pp. 11-18, (2015)

← 1 2 3 4 →