CO2 capture by adsorption and hydrate-based separation: A technological review

被引：0
作者：
Thilagan J. [1 ]
Gayathri B. [2 ]
Sugumar M. [3 ]
机构：
[1] Department of Chemical Engineering, Arunai Engineering College, Tiruvannamalai, Tamilnadu
[2] Department of Chemistry, Coimbatore Institute of Technology, Coimbatore, Tamilnadu
[3] Al Helal Gas Piping Co LLC, P.O. Box 121266, Dubai
来源：
International Journal of Environment and Waste Management | 2018年 / 22卷 / 1-4期
关键词：
Activation of adsorbents; Adsorption; Adsorption capacity; Chemical adsorbents; CO2; capture; Gas hydrates; Hydrate formation pressure; Hydrate-based gas separation; Kinetic promoters; Phase equilibrium; Physical adsorbents; Thermodynamic;
D O I：
10.1504/IJEWM.2018.094103
中图分类号：
学科分类号：
摘要：
The rising concern over global climate change has geared up a desire for reduction in greenhouse gas emissions. In this work, a systematic review of the literature work done so far on the application of adsorption and hydrate-based gas separation for the capture of CO2 from both fuel gas and flue gas mixtures has been carried out. Different adsorbents and operating conditions have been studied. Improvements in the adsorption capacities by thermal, mechanical and chemical activation have also been analysed. A range of reactor designs and the role of thermodynamic and kinetic promoters in the hydrate-based gas separation process for CO2 capture have been reviewed. Each experimental work has been scrutinised independently and compared finally. Furthermore, the advantages and limitations of adsorption process and hydrate-based gas separation process have been pointed out. Copyright © 2018 Inderscience Enterprises Ltd.
引用
收藏
页码：147 / 181
页数：34
相关论文
共 87 条
[1]  
Climate Science Basics, It’S Us, (2017)
[2]  
Adeyemo A., Kumar R., Linga P., Ripmeester J., Englezos P., Capture of carbon dioxide from flue or fuel gas mixtures by clathrate crystallisation in a silica gel column, International Journal of Greenhouse Gas Control, 4, 3, pp. 478-485, (2010)
[3]  
Aladko L., Dyadin Y.A., Rodionova T., Terekhova I., Clathrate hydrates of tetrabutylammonium and tetra isoamyl ammonium halides, Journal of Structural Chemistry, 43, 6, pp. 990-994, (2002)
[4]  
Andersen A., Divekar S., Dasgupta S., Cavka J.H., Aarti A.N., Spjelkavik A., Goswami A.N., Garg M.O., Bloma R., On the development of vacuum swing adsorption (VSA) technology for post-combustion CO<sub>2</sub> capture, Energy Procedia, 37, pp. 33-39, (2013)
[5]  
Auob H.S., Carbon dioxide capture from flue gas by pressure swing adsorption using carbon molecular sieve sorbent, Diyala Journal of Engineering Sciences, 8, 4, pp. 794-803, (2015)
[6]  
Babu P., Kumar R., Linga P., Pre-combustion capture of carbon dioxide in a fixed bed reactor using the clathrate hydrate process, Energy, 50, 1, pp. 364-373, (2012)
[7]  
Babu P., Kumar R., Linga P., Pre-combustion capture of carbon dioxide in a fixed bed reactor using the clathrate hydrate process, Energy, 50, 1, pp. 364-373, (2013)
[8]  
Babu P., Kumar R., Linga P., A new porous material to enhance the kinetics of clathrate process: Application to precombustion carbon dioxide capture, Environmental Science & Technology, 47, 22, pp. 13191-13198, (2013)
[9]  
Babu P., Yee D., Linga P., Palmer A., Khoo B.C., Tan T.S., Rangsunvigit P., Morphology of methane hydrate formation in porous media, Energy & Fuels, 27, 6, pp. 3364-3372, (2013)
[10]  
Babu P., Linga P., Kumar R., Englezos P., A review of the hydrate based gas separation (HBGS) process for carbon dioxide pre-combustion capture, Energy, 85, pp. 261-279, (2015)
123456789