Effects of B4C and Ti contents on structure and property of laser cladding Fe-Cr-Ni-Si alloy coatings

被引：0
作者：
Li, Meiyan [1 ]
Han, Bin [1 ]
Wang, Yong [1 ]
Song, Lixin [2 ]
Guo, Lanyang [1 ]
Yu, Mengfei [1 ]
机构：
[1] College of Electromechanical Engineering, China University of Petroleum, Qingdao
[2] Offshore Oil Engineering (Qingdao) Co., Ltd., Qingdao
来源：
Zhongguo Jiguang/Chinese Journal of Lasers | 2013年 / 40卷 / 12期
关键词：
Corrosion resistance; Fe-based powder; Hardness; Laser cladding; Materials; Structure;
D O I：
10.3788/CJL201340.1203008
中图分类号：
学科分类号：
摘要：
The Fe-based coatings with different compositions are produced on 45# steel by laser cladding technology, and the structure and property are analyzed. The results show that the cross section is composed of cladding coating, heat affected zone and the matrix after laser treatment, and the interface between cladding coating and the matrix is metallurgical bonding. The laser cladding coating is composed of columnar crystal, a little columnar crystal and fine dendrite, fine dendrite and carbides of type M23C6 from the bottom to surface. X-ray diffration results show that the content of austenite decreases and the content of martensite increases with the increment of B4C and Ti, while the microhardness and corrosion resistance are improved. However, when the Ti content reaches 4.5%, the structure changes obviously. Which is composed of a little cellular dendrite, fine dendrite and dendrite with plum blossom shape from the bottom to surface, and the hardness and corrosion resistance are best.
引用
收藏
相关论文
共 10 条
  • [1] He Q., Study on TiC/NiCrBSi cladding layer by laser cladding in-situ fabricated on the surface of oil well pump plunger, pp. 24-32, (2009)
  • [2] Wang L., Zhou J., Yu Y., Et al., Effect of powders refinement on the tribological behavior of Ni-based composite coatings by laser cladding, Applied Surface Science, 258, pp. 6697-6704, (2012)
  • [3] Han B., Li M., Wang Y., High-temperature oxidation properties of Fe-based alloy coating prepared by laser cladding, Chinese J Lasers, 38, 8, (2011)
  • [4] Zhang Y., Zhao A., Zhao Z., Et al., Influence of alloying element on continuous cooling solid phase transformation and hardness of TRIP steels, Journal of Shenyang University of Technology, 32, 4, pp. 390-395, (2010)
  • [5] Ivanov Y., Matz W., Rotshtein V., Et al., Pulsed electron-beam melting of high-speed steel: structural phase transformations and wear resistance, Surface and Coatings Technology, 150, 2-3, pp. 188-198, (2002)
  • [6] Toyserkani E., Khajepour A., Corbin S., 3-D finite element modeling of laser cladding by powder injection: effects of laser pulse shaping on the process, Optics and Lasers in Engineering, 41, 6, pp. 849-867, (2004)
  • [7] Chen L., Gu C., Xie P., Numerical analysis of temperature field in laser cladding on tooth surface of helical gear shaft, Chinese J Lasers, 38, 3, (2011)
  • [8] Jiang X., Li S., Li S., Corrosive Wear of Metals, pp. 220-221, (2003)
  • [9] Lalvani S.B., Zhang G., The corrosion of carbon steel in a chloride environment due to periodic voltage modulation: Part I, Corrosion Science, 37, 10, pp. 1567-1582, (1995)
  • [10] Kwok C.T., Cheng F.T., Man H.C., Microstructure and corrosion behaviour of laser surface-melted high-speed steels, Surface and Coating Technology, 202, 2, pp. 336-348, (2007)
1