Experimental researches on friction coefficient for disc cutters

被引：0

作者：

Zhang G. ^{[1
,2
]}

Xiao C. ^{[1
]}

机构：

[1] Department of Mechanical and Energy Engineering, Shaoyang University, Shaoyang, Hunan

[2] College of Mechanical and Electrical Engineering, Central South University, Changsha, Hunan

来源：

International Journal of Simulation: Systems, Science and Technology | 2016年 / 17卷 / 22期

基金：

中国国家自然科学基金;

关键词：

Disc cutter; Friction coefficient; Rock breaking efficiency; Service life; TBM;

D O I：

10.5013/IJSSST.a.17.22.19

中图分类号：

学科分类号：

摘要：

The disc cutter is the main tool for Tunnel Boring Machine (TBM for short), both the rock breaking efficiency and service life of which are directly related to the project schedule and cost. On the basis of contact stress characteristic for disc cutter and its movement rules, the mechanical model of disc is established, together with the micro model of friction coefficient. By using the MMW-1 Vertical universal friction and wear testing machine, the dry friction test bench is designed to simulate friction counterparts between disc cutter and rock. By experiments, the changing rules of friction coefficient with time are separately analyzed between H13 steel and sandstone, H13 and marble as well as H13 and granite. Finally, the theoretical and experimental results of friction coefficient’s changing rules with 3 different rocks are obtained, which can provide a theoretical reference for the optimization design of disc cutter and improve the study of disc cutter rock breaking efficiency and service life. © 2016, UK Simulation Society. All rights reserved.

引用

页码：19.1 / 19.7

共 11 条

[1]

Mengshu W., Tunneling by TBM/shield in China: State-of-art, Problems and Proposals, Tunnel Construction, 34, 3, pp. 179-187, (2014)

[2]

Javad G., Narges T., Application of artificial neural networks to the prediction of tunnel boring machine penetration rate, Mining Science and Technology, 20, (2010)

[3]

Zhang Z., Meng L., Sun F., Design theory of full face rock tunnel boring machine transition cutter edge angle and its application, Chinese Journal of Mechanical Engineering, 26, 3, pp. 541-546, (2013)

[4]

Javad G., Narges T., Application of artificial neural networks to the prediction of tunnel boring machine penetration rate, Mining Science and Technology, 20, (2010)

[5]

Zhang Z., Meng L., Sun F., Wear Analysis of Disc Cutters of Full Face Rock Tunnel Boring Machine, Chinese Journal of Mechanical Engineering, 27, 6, pp. 1294-1300, (2014)

[6]

Marji M.F., Simulation of crack coalescence mechanism underneath single and double disc cutters by higher order displacement discontinuity method, Journal of Central South University, 22, pp. 1045-1054, (2015)

[7]

Li J., The Research on Influence of Rock Breaking Mechanism by Disc Cutters under the Temperature of Rock, (2014)

[8]

Xiaohe X.U., Jing Y.U., Rock Crushin, (1984)

[9]

Rostami J., Study of pressure distribution within the crushed zone in the contact area between rock and disc cutters, International Journal of Rock Mechanics and Mining Sciences, 57, 1, pp. 172-186, (2013)

[10]

Suh N.P., Sin H.C., On the Genesis of Friction and its effect on wear, Solid Contact and Lubrication, 39, pp. 167-183, (1980)

← 1 2 →