Thermal Analysis of a Novel Oil Cooled Piston Using a Fluid-Solid Interaction Method

被引：0

作者：

Tong D. ^{[1
,2
]}

Qin S. ^{[1
,2
]}

Lin J. ^{[1
,2
]}

Sun J. ^{[3
]}

Hu Y. ^{[3
]}

机构：

[1] State Key Laboratory of Engine Reliability, Weifang

[2] Weichai Power Co. Ltd., Weifang

[3] School of Energy and Power Engineering, Shandong University, Jinan

来源：

Fluid Dynamics and Materials Processing | 2021年 / 17卷 / 04期

关键词：

CFD; cooling gallery; Diesel engine piston; oscillating cooling; thermal load;

D O I：

10.32604/FDMP.2021.013425

中图分类号：

学科分类号：

摘要：

Thermal load has a vital influence on the normal operation and service life of diesel engines. In this study, the thermal load and oil-cooling effect on diesel engine pistons were investigated by means of computational fluid dynamics. In particular, the flow and heat transfer characteristics of the cooling gallery were determined during the oscillation of the piston. Moreover, the temperature field distribution of the piston with and without the cooling gallery were compared. The results revealed that the cooling gallery has a prominent effect on reducing the thermal load on the piston crown and piston lands. To fully understand the oscillating heat transfer effect related to the cooling gallery and verify the accuracy of the calculation, the numerical results were also compared with temperature values experimentally measured at key positions of the piston. The measurements were found to be consistent with the calculation results within an acceptable error range, which proves the rationality and accuracy of the mathematical and numerical models used. © 2021. All Rights Reserved.

引用

页码：773 / 787

页数：14

共 29 条

[11]

Frulla G., Gill P., D'Oriano V., Lappa M., A practical engineering approach to the design and manufacturing of a mini kw blade wind turbine: Definition, optimization and CFD analysis, Fluid Dynamics & Materials Processing, 11, 3, pp. 257-277, (2015)

[12]

Kajiwara H., Fujioka Y., Suzuki T., An analytical approach for prediction of piston temperature distribution in diesel engines, JSAE Review, 23, 4, pp. 429-434, (2002)

[13]

Pan J., Nigro R., Matsuo E., 3-D modeling of heat transfer in diesel engine piston cooling galleries, SAE World Congress & Exhibition, 114, pp. 1174-1181, (2005)

[14]

Lu X. Q., He T., Zou D. Q., Thermal analysis of composite piston in marine diesel engine based on inverse evaluation method of heat transfer coefficient, Chinese Internal Combustion Engine Engineering, 33, 4, pp. 71-76, (2012)

[15]

Nasif G., Barron R. M., Balachandar R., Numerical simulation of piston cooling with oil jet impingement, Transactions of the ASME, 138, 12, (2016)

[16]

Zhong J., Steady and transient numerical simulation of oil-inject shaking cooling and temperature distribution in piston, (2012)

[17]

Cheng Z., Wang Y., Wang Y., Nie Q., On the application of a mobile grid technology to computational fluid dynamics, Fluid Dynamics & Materials Processing, 15, 4, pp. 357-366, (2019)

[18]

Chekifi T., Droplet breakup regime in a cross-junction device with lateral obstacles, Fluid Dynamics & Materials Processing, 15, 5, pp. 545-555, (2019)

[19]

Hirt C. W., Nichols B. D., Volume of fluid (VOF) method for the dynamics of free boundaries, Journal of Computational Physics, 39, 1, pp. 201-225, (1981)

[20]

Deshmukh P. W., Sapali S. N., CFD analysis of heat transfer in reciprocating helical coil with piston cooling application, International Review of Mechanical Engineering, 1, 5, (2007)

← 1 2 3 →