Thermal Analysis of a Novel Oil Cooled Piston Using a Fluid-Solid Interaction Method

被引：0
作者：
Tong D. [1 ,2 ]
Qin S. [1 ,2 ]
Lin J. [1 ,2 ]
Sun J. [3 ]
Hu Y. [3 ]
机构：
[1] State Key Laboratory of Engine Reliability, Weifang
[2] Weichai Power Co. Ltd., Weifang
[3] School of Energy and Power Engineering, Shandong University, Jinan
来源：
Fluid Dynamics and Materials Processing | 2021年 / 17卷 / 04期
关键词：
CFD; cooling gallery; Diesel engine piston; oscillating cooling; thermal load;
D O I：
10.32604/FDMP.2021.013425
中图分类号：
学科分类号：
摘要：
Thermal load has a vital influence on the normal operation and service life of diesel engines. In this study, the thermal load and oil-cooling effect on diesel engine pistons were investigated by means of computational fluid dynamics. In particular, the flow and heat transfer characteristics of the cooling gallery were determined during the oscillation of the piston. Moreover, the temperature field distribution of the piston with and without the cooling gallery were compared. The results revealed that the cooling gallery has a prominent effect on reducing the thermal load on the piston crown and piston lands. To fully understand the oscillating heat transfer effect related to the cooling gallery and verify the accuracy of the calculation, the numerical results were also compared with temperature values experimentally measured at key positions of the piston. The measurements were found to be consistent with the calculation results within an acceptable error range, which proves the rationality and accuracy of the mathematical and numerical models used. © 2021. All Rights Reserved.
引用
收藏
页码：773 / 787
页数：14
相关论文
共 29 条
[1]  
El-Askary W. A., Balabel A., Wilson S., Numerical and experimental investigations of jet impingement on a periodically oscillating-heated flat plate, Computer Modeling in Engineering & Sciences, 95, 6, pp. 483-499, (2013)
[2]  
Zhu H. R., Peng P. Y., Liu Q. G., Study on oscillation cooling technology of highly-intensified piston, Internal Combustion Engine & Parts, 9, pp. 98-100, (2018)
[3]  
Fu W. S., Tong B. H., Numerical investigation of heat transfer characteristics of the heated blocks in the channel with a transversely oscillating cylinder, International Journal of Heat and Mass Transfer, 47, 2, pp. 341-351, (2004)
[4]  
Lee G., Han S., Kim H., Yoo Y., Effects of piston galleries on the piston temperatures of a diesel engine, International Conference on Advanced Engineering Theory and Applications, 415, pp. 469-474, (2016)
[5]  
Thiel N., Weimar H. J., Kamp H., Windisch H., Advanced piston cooling efficiency: A comparison of different new gallery cooling concepts, SAE Transactions, 116, 3, pp. 978-992, (2007)
[6]  
Luff D. C., Law T., Shayler P. J., The effect of piston cooling jets on diesel engine piston temperatures, emissions and fuel consumption, SAE International Journal of Engines, 5, 3, pp. 1300-1311, (2012)
[7]  
Deng X. W., Lei J. L., Wen J., Impact of piston secondary motion on oscillating flow and heat transfer of oil inside piston cooling gallery of diesel engine, Transactions of the Chinese Society of Agricultural Engineering, 33, 14, pp. 85-92, (2017)
[8]  
Wang P., Liang R. B., Yu Y. B., The flow and heat transfer characteristics of engine oil inside the piston cooling gallery, Applied Thermal Engineering, 115, pp. 620-629, (2017)
[9]  
Rahman M. M., Ariffin A. K., Abdullah S., Effect of nitriding treatment on fatigue life for free piston linear engine component using frequency response method: A finite element approach, Structural Durability & Health Monitoring, 3, 4, pp. 197-210, (2007)
[10]  
Zhang S. C., Tao X. H., Lu J. S., Design, optimization and CFD simulation of a nozzle for industrial cleaning processes based on high-pressure water jets, Fluid Dynamics & Materials Processing, 11, 2, pp. 143-155, (2015)
123