Experimental study on aseismic behavior of squat RC shear walls due to chloride ion erosion

被引:0
|
作者
Zheng S.-S. [1 ,2 ]
Zhou Y. [1 ,2 ]
Li Q.-Q. [4 ]
Long L. [1 ,2 ]
Dong L.-G. [1 ,2 ]
He J.-C. [3 ]
机构
[1] School of Civil Engineering, Xi'an University of Architecture & Technology, Xi'an
[2] Key Lab of Structural Engineering and Earthquake Resistance, Ministry of Education (XAUAT), Xi'an
[3] Architecture Design & Research Group of Xi'an University of Architecture & Technology, Xi'an
[4] School of Civil Engineering, Southeast University, Nanjing
来源
Gongcheng Lixue/Engineering Mechanics | 2019年 / 36卷 / 12期
关键词
Corrosion; Quasi-static loading test; Seismic behaviors; Shear deformation; Squat RC shear wall;
D O I
10.6052/j.issn.1000-4750.2018.11.0592
中图分类号
学科分类号
摘要
In order to study the influence of corrosion degree on the bearing capacity, deformation capacity and ratio of shear deformation to total horizontal displacement of squat RC shear wall due to chloride ion erosion, the artificial climatic simulation technology was used to accelerate the corrosion of five squat RC shear wall specimens, and then a quasi-static loading test was carried out. The results show that under the action of chloride ion erosion, the cracks along the longitudinal reinforcement direction of the concealed column increase in quantity and become wider in width than that along the stirrups and distribution reinforcement direction. With the corrosion rate of lateral distribution reinforcement increasing from 0% to 16. 56%, the bearing capacity, deformation capacity, ductility and other aspects show different degrees of degradation, of which the bearing capacity is weakened by 12. 6%, the ductility is reduced by 23.0%. Simultaneously, the ratio of shear deformation to total horizontal displacement under cracking, yielding and peak points all show a growing trend, the average ratio of the three points is increased from 22% to 36%, and the brittle failure characteristics are more obvious at the time of failure. The research results obtained can provide a theoretical support for both the aseismic performance study of corroded squat RC shear wall members due to chloride ion erosion and the life-cycle aseismic performance evaluation of RC structures with squat shear walls. © 2019, Engineering Mechanics Press. All right reserved.
引用
收藏
页码:69 / 78
页数:9
相关论文
共 19 条
  • [1] Jin W., Corroded Concrete Structures, pp. 1-11, (2011)
  • [2] Gong J., Zhong W., Zhao G., Experimental study on low-cycle behavior of reinforced concrete member under eccentric compression, Journal of Building Structures, 25, 5, pp. 92-97, (2004)
  • [3] Zheng S., Dong L., Zuo H., Et al., Experimental investigation on seismic behaviors of corroded RC frame columns in artificial climate, Journal of Building Structures, 39, 4, pp. 28-36, (2018)
  • [4] Zheng S., Liu W., Zuo H., Et al., Aseismic performance test of RC frame beams considering corrosion with different shear span ratio in the coastal atmosphere, Engineering Mechanics, 35, 4, pp. 78-86, (2018)
  • [5] Xu S., Niu D., The shear behavior of corroded simply supported reinforced concrete beam, Journal of Building Structures, 25, 5, pp. 98-104, (2004)
  • [6] Afsar Dizaj E., Madandoust R., Kashani M.M., Exploring the impact of chloride-induced corrosion on seismic damage limit states and residual capacity of reinforced concrete structures, Structure and Infrastructure Engineering, 14, 6, pp. 714-729, (2018)
  • [7] Yang S., Song X., Jia H., Et al., Experimental research on hysteretic behaviors of corroded reinforced concrete columns with different maximum amounts of corrosion of rebar, Construction & Building Materials, 121, pp. 319-327, (2016)
  • [8] Guo A., Li H., Ba X., Et al., Experimental investigation on the cyclic performance of reinforced concrete piers with chloride-induced corrosion in marine environment, Engineering Structures, 105, pp. 1-11, (2015)
  • [9] Hidalgo P.A., Ledezma C.A., Jordan R.M., Seismic behavior of squat reinforced concrete shear walls, Earthquake Spectra, 18, 2, pp. 287-308, (2002)
  • [10] Greifenhagen C., Lestuzzi P., Static cyclic tests on lightly reinforced concrete shear walls, Engineering Structures, 27, 11, pp. 1703-1712, (2005)