Determination of curing kinetics of a two-stage curing epoxy resin for high performance composites

被引：0
作者：
Karcher M. [1 ,2 ]
Chaloupka A. [2 ,3 ]
Henning F. [1 ,2 ]
Schmölzer S. [4 ]
Moukhina E. [4 ]
机构：
[1] Institut für Fahrzeugsystemtechnik (FAST), Lehrstuhl für Leichtbautechnologie am Karlsruher Institut für Technologie (KIT), Rintheimer-Queralle 2, Karlsuhe
[2] Fraunhofer Institut für Chemische Technologie ICT, Joseph-von-fraunhofer Str. 7, Pfinztal
[3] Fraunhofer Institut für Chemische Technologie ICT, Am Technologiezentrum 2, Augsburg
[4] NETZSCH-Gerätebau GmbH, Wittelsbacherstrasse 42, Selb
来源：
| 1600年 / Carl Hanser Verlag卷 / 2016期
关键词：
2-step curing; Cure kinetics; Dielectrical analysis; DSC; Epoxy resin; FRP;
D O I：
10.3139/O999.03022016
中图分类号：
学科分类号：
摘要：
The Fraunhofer ICT is developing a new direct-process, called InlinePrepreg, for manufacturing of high performance composites for mass production. For realizing the new process, a two-step curing epoxy resin system from the company Huntsman Advanced Materials shall be used. Without knowing the curing behavior a process development, optimization and validation is not possible. The following investigations are dealing with the characterization of the epoxy resin system by using dynamic DSC and DEA measurements and followed by modelling the curing behavior. Also the results of two different measurement methods are compared and correlated. © Carl Hanser Verlag.
引用
收藏
页码：80 / 111
页数：31
相关论文
共 19 条
  • [1] Borchard-Tuch C., Neue Werkstoffe für Den Airbus A380 Chemie in Unserer Zeit, 40, 6, pp. 407-409, (2006)
  • [2] Tager O., Kunststoffe und Faserverbundkunststoffe im Automobilbau - Zukünftige Chancen und Herausforderungen 12, Schwarzheider Kunststoffkolloquium, Schwarzheide, pp. 19-20, (2012)
  • [3] Beardmorea P., Johnson C.F., The potential for composites in structural automotive applications, Composites Science and Technology, 26, 4, pp. 251-281, (1986)
  • [4] Lassig R., Eisenhut M., Mathias A., Et al., Serienproduktion von hochfesten Faserverbundbauteilen - Perspektiven für den deutschen Maschinen- und Anlagenbau, Roland Berger Strategy Consultant, (2012)
  • [5] Witten E., Kraus T., Kuhnel M., Composites-Marktbericht 2015- Marktentwicklungen, (2015)
  • [6] Suzuki T., Jun T., Prediction of energy intensity of carbon fiber reinforced plastics for mass-produced passenger cars, 9Th International SAMPE Symposium, 29, (2005)
  • [7] Prime R.B., Thermal Characterization of Polymeric Materials, (1981)
  • [8] Barton J., Advances in Polymer Sciences, (1985)
  • [9] Duswalt A.A., The practice of obtaining kinetic data by differential scanning calorimetry, Thermochim Acta, 8, pp. 57-68, (1974)
  • [10] Fava R.A., Differential scanning calorimetry of epoxy resins, Polymer, 9, pp. 137-151, (1968)
12