Bioorganic activated carbon from cashew nut shells for H2 adsorption and H2/CO2, H2/CH4, CO2/CH4, H2/CO2/CH4 selectivity in industrial applications

被引：3

作者：

Serafin, Jaroslaw ^{[1
]}

Dziejarski, Bartosz ^{[2
,3
]}

Fonseca-Bermúdez, Óscar Javier ^{[4
]}

Giraldo, Liliana ^{[5
]}

Sierra-Ramírez, Rocío ^{[4
]}

Bonillo, Marta Gil ^{[1
]}

Farid, Ghulam ^{[6
,7
]}

Moreno-Piraján, Juan Carlos ^{[8
]}

机构：

[1] Department of Inorganic and Organic Chemistry, Inorganic Chemistry Section, University of Barcelona, Martí i Franquès 1-11, Barcelona

[2] Department of Space, Earth and Environment, Division of Energy Technology, Chalmers University of Technology, Gothenburg

[3] Faculty of Environmental Engineering, Wroclaw University of Science and Technology, Wroclaw

[4] Department of Chemical and Food Engineering, Universidad de Los Andes, Bogotá

[5] Departamento de Química, Universidad Nacional de Colombia, Bogotá

[6] Department of Applied Physics, University of Barcelona, C/Martí i Franquès, 1, Catalunya, Barcelona

[7] ENPHOCAMAT Group, Institute of Nanoscience and Nanotechnology (IN2UB), University of Barcelona, C/ Martí i Franquès, 1, Catalunya, Barcelona

[8] Departamento de Química, Grupo de Investigación en Sólidos Porosos y Calorimetrái, Universidad de Los Andes, Bogotá

来源：

International Journal of Hydrogen Energy | 2024年 / 86卷

关键词：

Activated carbon; Cashew nut shells; Gas selectivity; High-pressure gas adsorption; Hydrogen storage;

D O I：

10.1016/j.ijhydene.2024.08.417

中图分类号：

学科分类号：

摘要：

This research explores the production of activated carbon (AC) from cashew nut shells using a potassium hydroxide (KOH) activation method, with a focus on its application in high-pressure gas adsorption. Among the synthesized samples, AC850 demonstrated the highest efficiency, displaying a specific surface area of 1972 m2/g and total and micropore volumes of 0.847 cm3/g and 0.724 cm3/g, respectively. The bioorganic activated carbon exhibited significant sorption capabilities for H2, with uptake values of 13.34 mmol/g (2.69 wt%) at 10 bar and 25 °C, and a H2/CH4 selectivity range between 43.4 and 2.6. Calculations were also conducted for selectivity in a mixture of three gases (H2, CO2, and CH4) in industrial settings. Advanced characterization methods such as N2/CO2 adsorption isotherms, FT-IR, Raman spectroscopy, SEM, and TGA were employed to analyze the structural and chemical properties of the produced AC, including its functional groups and molecular structure. The research underscores the potential of utilizing agricultural waste, particularly cashew nut shells, to develop efficient materials for H2 storage and purification. The high-pressure adsorption capability and eco-friendly nature of the manufactured activated carbon make it suitable for both environmental and industrial applications. © 2024 The Authors

引用

页码：662 / 676

页数：14

共 58 条

[1] Serafin J., Dziejarski B., Activated carbons—preparation, characterization and their application in CO2 capture: a review, Environ Sci Pollut Control Ser, pp. 1-55, (2023)
[2] Eberle U., Felderhoff M., Schueth F., Chemical and physical solutions for hydrogen storage, Angew Chem Int Ed, 48, pp. 6608-6630, (2009)
[3] Mashhadimoslem H., Ghaemi A., Maleki A., Elkamel A., Enhancement of oxygen adsorption using biomass-based oxidized porous carbon, J Environ Chem Eng, 11, (2023)
[4] Nazir G., Rehman A., Hussain S., Aftab S., Heo K., Ikram M., Patil S.A., Aizaz Ud Din M., Recent advances and reliable assessment of solid‐state materials for hydrogen storage: a step forward toward a sustainable H2 economy, Adv Sustainable Sys, 6, (2022)
[5] Rimza T., Saha S., Dhand C., Dwivedi N., Patel S.S., Singh S., Kumar P., Carbon‐based sorbents for hydrogen storage: challenges and sustainability at operating conditions for renewable energy, ChemSusChem, 15, (2022)
[6] Singh G., Lakhi K.S., Sil S., Bhosale S.V., Kim I., Albahily K., Vinu A., Biomass derived porous carbon for CO2 capture, Carbon, 148, pp. 164-186, (2019)
[7] Serafin J., Dziejarski B., Srenscek-Nazzal J., An innovative and environmentally friendly bioorganic synthesis of activated carbon based on olive stones and its potential application for CO2 capture, Sustain Mat Tech, 38, (2023)
[8] Samsuri A., Sadegh-Zadeh F., Seh-Bardan B., Characterization of biochars produced from oil palm and rice husks and their adsorption capacities for heavy metals, Int J Environ Sci Technol, 11, pp. 967-976, (2014)
[9] Cui X., Jia F., Chen Y., Gan J., Influence of single-walled carbon nanotubes on microbial availability of phenanthrene in sediment, Ecotoxicology, 20, pp. 1277-1285, (2011)
[10] Huang Y., Zhao G., Preparation and characterization of activated carbon fibers from liquefied wood by KOH activation, Holzforschung, 70, pp. 195-202, (2016)

← 1 2 3 4 5 6 →