An improved topology of cascaded multilevel inverter with low switch count

被引：0

作者：

Das B. ^{[1
]}

Patra M. ^{[1
]}

Chatterjee D. ^{[2
]}

Bhattacharya A. ^{[1
]}

机构：

[1] Department of Electrical Engineering, NIT Agartala, Jirania, Barjala, Tripura West

[2] Department of Electrical Engineering, Jadavpur University, Kolkata, West Bengal

来源：

International Journal of Power Electronics | 2020年 / 12卷 / 01期

关键词：

Cascaded multilevel inverter; H-bridge; Loss comparison; Reduced switch; Total standing voltage; TSV;

D O I：

10.1504/IJPELEC.2020.108383

中图分类号：

学科分类号：

摘要：

An improved topology of the multilevel inverter is described in this paper. Proposed topology is comprised of the basic module to get positive levels at the output. An H-bridge can be formed to obtain ac output. Developed topology significantly reduces the number of IGBTs, DC voltage sources, gate drivers for the same number of levels. Different algorithms are presented to determine the number of levels, switches, total blocking voltage and total standing voltage. Comparison of the proposed topology with the conventional cascaded multilevel inverters and other existing topologies in the literature has been carried out to show the advantages of the newly proposed topology. The operation and performance of the proposed multilevel inverter are verified by suitable experimental results with a single phase 15-level multilevel inverter considering resistive and inductive loads. Copyright © 2020 Inderscience Enterprises Ltd.

引用

页码：1 / 29

页数：28

共 24 条

[1]

Ajami A., Oskuee M.R.J., Mokhberdoran A., Bossche A.V.D., Developed cascaded multilevel inverter topology to minimise the number of circuit devices and voltage stresses of switches, IET Power Electron., 7, 2, pp. 459-466, (2014)

[2]

Babaei E., A cascade multilevel converter topology with reduced number of switches, IEEE Transactions on Power Electronics, 23, 6, pp. 2657-2664, (2008)

[3]

Babaei E., Hosseini S.H., Charge balance control methods for asymmetrical cascade multilevel converters, Proc. ICEMS, pp. 74-79, (2007)

[4]

Babaei E., Hosseini S.H., New cascaded multilevel inverter topology with minimum number of switches, Journal of Energy Conversion and Management, 50, 11, pp. 2761-2767, (2009)

[5]

Babaei E., Alilu S., Lali S., A new general topology for cascaded multilevel inverters with reduced number of components based on developed H-bridge, IEEE Transc. On Industrial Electronics, 61, 8, pp. 3932-3939, (2014)

[6]

Babaei E., Laali S., Bayat Z., A single-phase cascaded multilevel inverterbased on a new basic unit with reduced number of power switches, IEEE Transactions on Industrial Electronics, 62, 2, pp. 922-929, (2015)

[7]

Baker R.H., Bannister L.H., Electric Power Converter, (1975)

[8]

Boora A.A., Nami A., Zare F., Ghosh A., Blaabjerg F., Voltagesharing converter to supply single-phase asymmetrical four-level diode clamped inverter with high power factor loads, IEEE Trans. Power Electron., 25, 10, pp. 2507-2520, (2010)

[9]

Ceglia G., Guzman V., Sanchez C., Ibanez F., Walter J., Gimenez M.I., A new simplified multilevel inverter topology for DC-AC conversion, IEEE Transactions on Power Electronics, 21, 5, pp. 1311-1319, (2006)

[10]

Ebrahimi J., Babaei E., Gharehpetian G.B., A new multilevel converter topology with reduced number of power electronic components, IEEE Transactions on Industrial Electronics, 59, 2, pp. 655-667, (2012)

← 1 2 3 →