Requirements for Monte Carlo Method during Radiation Shielding Optimization Design of Advanced PWR Nuclear Power Plants

被引：0

作者：

Lyu W. ^{[1
]}

Xiong J. ^{[1
]}

Liu J. ^{[1
]}

Tang S. ^{[1
]}

机构：

[1] State Key Laboratory of Nuclear Power Safety Monitoring Technology and Equipment, China Nuclear Power Engineering Co., Ltd., Shenzhen, 518172, Guangdong

来源：

Hedongli Gongcheng/Nuclear Power Engineering | 2020年 / 41卷 / 05期

关键词：

Monte Carlo method; PWR nuclear power plant; Radiation shielding optimization;

D O I：

10.13832/j.jnpe.2020.05.0173

中图分类号：

学科分类号：

摘要：

Based on the analysis of the problems resulting from the tool limitations during the radiation shielding design of M310 nuclear power plant and the requirements presented by the radiation shielding design of HPR1000 nuclear power plant, the requirements for Monte Carlo(MC) method during the optimization design of the radiation shielding for advanced PWR nuclear power plant are presented from four aspects, which are the software interface, input interface, dose rate calculation function and radiation field application expansion. The radiation shielding optimization design practice based on MC method in HPR1000 nuclear power plant shows that, by the development of the software interface, input interfaces and radiation field application expansion, the calculation code based on MC method can play a key role in the radiation shielding optimization design of advanced PWR nuclear power plant, and significantly improve the radiation shielding optimization design of PWR nuclear power plant. © 2020, Editorial Board of Journal of Nuclear Power Engineering. All right reserved.

引用

页码：173 / 177

页数：4

共 3 条

[1] pp. 5-6, (2002)
[2] WU Y, TEAM FDS, CAD-based interface programs for fusion neutron transport simulation, Fusion Eng, 84, pp. 1987-1992, (2009)
[3] WU Y, SONG J, ZHENG H, Et al., CAD-Based monte carlo progr am for integrated simulation of nuclear system Supermc, Ann Nucl Energy, 82, pp. 161-168, (2015)

← 1 →