Experimental study on flow characteristics of valve-less piezoelectric pump with triangular prism bluff bodies

被引：0

作者：

Zhang R. ^{[1
]}

Zhang J. ^{[2
,3
]}

Hu X. ^{[1
]}

Chen X. ^{[1
]}

机构：

[1] College of Engineering and Design, Lishui University, Lishui

[2] College of Mechanical and Electrical Engineering, Guangzhou University, Guangzhou

[3] State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing

来源：

| 2016年 / Nanjing University of Aeronautics an Astronautics卷 / 36期

关键词：

Bluff body; Flow rate; Flow resistance; Triangular prism; Valveless piezoelectric pump;

D O I：

10.16450/j.cnki.issn.1004-6801.2016.03.028

中图分类号：

学科分类号：

摘要：

To improve the output flow of a valve-less piezoelectric pump and to analyze the effects on the pump's output flow with no-moving-parts (triangular prism group) parameters, a valve-less piezoelectric pump is designed and produced with 3D printing technology that has five different groups of parameters for its triangular prism bluff bodies, and flow tests are carried out for each group. First, the structure and working principle of the piezoelectric pump are analyzed. Second, the formula for the pump's flow rate is established and obtain the expression between pump flow and parameters of triangular prisms, the relationship between the positive and negative flow resistance ratio of the three prism, the relationship between the number of the three prisms and the pump output flow is drawn with MATLAB software. Experimental results show the following. With constant driving voltage and driving frequency, the triangular prism group's parameters all greatly impact the pump's output flow. The output flow increases with a growth of numbers and increased height of triangular prisms, decreases as the gap between the triangular prism and one-way pump chamber increases, and decreases with increased apex angle of the triangular prism. The output flow also increases with a growth of the gap, but decreases after the gap reaches a certain value. © 2016, Editorial Department of JVMD. All right reserved.

引用

页码：580 / 585

页数：5

共 12 条

[1]

Kan J., Yang Z., Cheng G., Rescarh on piezoelectric pump and its development, Optics and Precision Engineering, 10, 6, pp. 619-625, (2002)

[2]

Yoshida K., Watanabe K., Yokota S., Development of a piezoelectric micropump using resonantly-driven active check valve, Proceedings of the SICE Annual Conferenence 2005 in Okayama, pp. 2510-2513, (2005)

[3]

Foster F.K., Bardell R.L., Blanchard A.P., Et al., Micropumps with fixed valves

[4]

Cheng G., Jiang D., Sun X., Et al., Design and experime nt on dual-chamber piezoelectric pump with four actuators, Journal of Drainage and Irrigation Machinery Engineering, 28, 3, pp. 190-193, (2010)

[5]

Huang J., Zhang J., Wang S., Theory and experimental verification on valveless piezoelectric pump with variable cross section Y-shape tubes, Journal of Vibration, Measurement & Diagnosis, 34, 1, pp. 15-19, (2014)

[6]

Cheng G., Feng L., Zeng P., Et al., Experimental study of piezoelectric vibrator deformation and cavity volume fluctuation of piezoelectric pump, Journal of Drainage and Irrigation Machinery Engineering, 30, 4, pp. 412-416, (2012)

[7]

Stemme E., Stemme G., A valve-less diffuser/nozzle-based fluid pump, Sensors & Actuators A Physical, 39, 12, pp. 159-167, (1993)

[8]

Forster F.K., Bardell L., Afromowitz M.A., Et al., Design, fabrication and testing of fixed-valve micropumps, Proceedings of the ASME Fluids Engineering Division, pp. 39-44, (1995)

[9]

Zhang J., Wang S., Study of piezoelectric valveless diffuser/nozzle-based fluid pump one-way flow principle and the pump flow, Piezoelectrics & Acoustooptics, 23, 1, pp. 23-25, (2001)

[10]

Xia Q., Zhang J., Li H., Et al., Valve-less piezoelectric pump with unsymmetrical slope chamber bottom, Optics and Precision Engineering, 14, 4, pp. 641-647, (2006)

← 1 2 →