Parameter design of tip relief for spur gear pair with addendum modification

被引：0

作者：

Sun Y.-N. ^{[1
]}

Ma H. ^{[1
]}

Feng M.-J. ^{[1
]}

Li Z.-W. ^{[1
]}

Wang Q.-B. ^{[2
]}

机构：

[1] School of Mechanical Engineering and Automation, Northeastern University, Shenyang, 110819, Liaoning

[2] School of Electro-mechanical Engineering, Xidian University, Xi'an, 710071, Shaanxi

来源：

Gongcheng Lixue/Engineering Mechanics | 2018年 / 35卷 / 07期

关键词：

Addendum modification; Parameters design; Spur gear pairs; Time-varying mesh stiffness; Tip relief;

D O I：

10.6052/j.issn.1000-4750.2017.11.0240

中图分类号：

学科分类号：

摘要：

An analytical model is developed for a spur gear pair with an addendum modification to concern the tip relief when calculating time-varying mesh stiffness, by considering the effects of nonlinear contact stiffness, of revised fillet-foundation stiffness and of extended tooth contact. The proposed model is verified by the finite element (FE) method. The ranges of optimum parameters for tip relief are acquired by making the sum of the first five-step amplitude of fast Fourier transform (FFT) for mesh stiffness minimum. Furthermore, stress analysis is conducted to prove the optimal modification parameters based on the FE method. Results showed that the design method based on the sum of the first five-step amplitude of FFT for mesh stiffness minimum can determine efficiently the optimal modification parameter range and the stress analysis based on the finite element method can further verify the optimal parameters of tip relief. The fluctuation of stiffness and stress decrease obviously after tip relief, which can contribute to the reduction of vibration and noise in the meshing process of gear pairs. The results can provide a theoretical basis for the tip relief design of a spur gear pair with an addendum modification. © 2018, Engineering Mechanics Press. All right reserved.

引用

页码：243 / 248and256

共 26 条

[1]

Li R., Stiffness Analysis and Modification of Gear Transmission, pp. 262-286, (1998)

[2]

Li S., Mechanical Principle, pp. 102-122, (2002)

[3]

Sun Z., Leng X., Wei Y., Et al., Mechanical Design, pp. 102-126, (2000)

[4]

Du F., Research on tooth modification method of two-stage planetary gearbox, (2015)

[5]

Wei Y., Chen J., Wang M., Natural frequency analysis for torsional vibration of a gear-rotor system with random parameters, Engineering Mechanics, 28, 4, pp. 172-177, (2011)

[6]

Wei Y., Chen J., Ma H., Analysis of nonlinear dynamic response of gear-rotor with random parameters, Engineering Mechanics, 29, 11, pp. 319-324, (2012)

[7]

Tang J., Chen S., Zhong J., An improved nonlinear model for a spur gear pair system, Engineering Mechanics, 25, 1, pp. 217-223, (2008)

[8]

Zhang X., Calculation and machining of involute gear with tip modification, Nantong Machinery Research Institute, 9, 6, pp. 22-25, (1985)

[9]

Tang Y., Chang S., He Y., Et al., Study on influence of tooth profile modification to contact force, Cold Work and General Machinery, 4, pp. 7-9, (2010)

[10]

Shang Z., Liu H., Xie Z., Et al., Principle and application of gear modification, Journal of Dalian Fisheries University, 24, pp. 220-221, (2009)

← 1 2 3 →