Microstructure and high cycle fatigue property of HIPed GH4169 superalloy fabricated by laser solid forming

被引：0

作者：

Liu, Fencheng ^{[1
,2
]}

Yu, Xiaobin ^{[1
]}

Lin, Xin ^{[2
]}

He, Lihua ^{[1
]}

Huang, Chunping ^{[1
,2
]}

机构：

[1] National Defense Key Disciplines Laboratory of Light Alloy Processing Science and Technology, Nanchang Hangkong University, Nanchang, 330063, Jiangxi

[2] State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi'an, 710072, Shannxi

来源：

Guangxue Xuebao/Acta Optica Sinica | 2014年 / 34卷

关键词：

Fatigue; Laser solid forming; Laser technique; Materials processing; Superalloy;

D O I：

10.3788/AOS201434.s114006

中图分类号：

学科分类号：

摘要：

The fatigue property of laser solid forming (LSF) GH4169 superalloy is worse for the influences of the coarse and uneven distributed grains and the existence of large amount of twin boundaries. The post hot isostatic pressing (HIP) process is used to the LSF GH4169 superalloy sample to improve its high cycle fatigue property owing to the enhancement of density and the uniform of the grain structure, combined with the post heat treatment. The results show that the grains are refined to an average size of 100~200 μm from 50~500 μm and their spherical degrees are raised. The interface structure also changes and the volume fraction of <111>60℃ twin boundary clearly decreases. HIP can effectively improve the high cycle fatigue property of LSF GH4169 superalloy, however, it is still lower than the standard value of forged GH4169.

引用

页数：6

共 16 条

[1]

Huang W., Lin X., Chen J., Et al., Laser Solid Forming, pp. 1-5, (2007)

[2]

Lin X., Yang H., Chen J., Et al., Microstructure evolution of 316L stainless steel during laser rapid forming , Acta Metallurgical Sinica, 42, 4, pp. 361-368, (2006)

[3]

Dinda G.P., Dasgupta A.K., Mazumder J., Laser aided direct metal deposition of Inconel 625 superalloy: microstructural evolution and thermal stability , 509, 1-2, pp. 98-104, (2009)

[4]

Zhao X., Chen J., Lin X., Et al., Study on microstructure and mechanical properties of laser rapid forming Inconel 718 , Materials Science and Engineering A, 478, 1-2, pp. 119-124, (2008)

[5]

Xi M., Gao S., Research on tensile properties of Inconel 718 superalloy fabricated by laser rapid forming process , 39, 3, (2012)

[6]

Zhao W., Lin X., Liu F., Et al., Effect of heat treatment on microstructure and mechanical properties of laser solid forming inconel 718 superalloy , 36, 12, pp. 3220-3225, (2009)

[7]

Zhao X.M., Lin X., Chen J., Et al., HIP treatment of superalloy Rene88DT prepared by laser rapid forming , The Chinese Journal of Nonferrous Metals, 18, 8, pp. 1446-1452, (2008)

[8]

Xi M., Gao S., Microstructures and mechanism of cracks forming of Rene 80 high-temperature alloy fabricated by laser rapid forming process , 39, 8, (2012)

[9]

Liu F., Lin X., Yang G., Et al., Microstructure and mechanical properties of laser solid formed nickle base superalloy inconel 718 prepared in different atmospheres , Acta Metallurgical Sinica, 46, 9, pp. 1047-1054, (2010)

[10]

Andersson J., The influence of grain size variation on metal fatigue , International Journal of Fatigue, 27, 8, pp. 847-852, (2005)

← 1 2 →