Analysis on Load Characteristics of High-speed Train Gearbox

被引：0
|
作者：
Li G. [1 ]
Wang W. [1 ]
Yang G. [1 ]
机构：
[1] School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2018年 / 54卷 / 04期
关键词：
Fatigue damage; Gearbox; Load characteristics; Trend load; Vibration isolating rubber;
D O I：
10.3901/JME.2018.04.270
中图分类号：
学科分类号：
摘要：
Taking the gearbox of a certain model as the research object, the finite element model of vibration isolation rubber is established to analyze the effect of load frequency, amplitude and pre-load on the nonlinear stiffness of the rubber. The gearbox load is obtained by the suspension bar force sensor. The load time history and distribution characteristics are provided under typical service cases such as starting, braking, straight line running, slope passing, and so on. On the basis of statistics, the influence of trend load on dynamic load and load spectrum are studied. The fatigue damage influence parameter is defined to analyze the influence of different loads on the structural damage. It is shown that in a certain load frequency range, the nonlinear stiffness of the rubber is less affected by the frequency and it increases with the increase of pre-load. The increase of trend load makes the amplitude of dynamic load increase obviously. The influence parameter values of fatigue damage caused by trend load and dynamic load are 0.04 and 0.69. It would decrease 31% if the trend load is not considered in the load spectrum compilation. The research result provides a certain degree of reference for simulation and domestic design of the gearbox. © 2018 Journal of Mechanical Engineering.
引用
收藏
页码：270 / 277
页数：7
相关论文
共 20 条
  • [1] Wang W., Hui X., Ma J., Fatigue crack mechanism research on high speed train equipment cabin frame, Journal of Mechanical Engineering, 51, 6, pp. 142-147, (2015)
  • [2] Ren Z., Sun S., Li Q., Axle spring load test and dynamic characteristics analysis of high speed EMU, Journal of Mechanical Engineering, 46, 10, pp. 109-114, (2010)
  • [3] Li G., Liu Z., Wang W., Et al., Fatigue crack mechanism study on high-speed EMU gearbox, Journal of Mechanical Engineering, 53, 2, pp. 99-105, (2017)
  • [4] Raghothama A., Narayanan S., Bifurcation and chaos in geared rotor bearing system by incremental harmonic balance method, Journal of Sound and Vibration, 226, 3, pp. 469-492, (1999)
  • [5] Zhu C., Lu B., Song C., Et al., Research on nonlinear coupling dynamitic characteristics of large burden marine gearbox, Journal of Mechanical Engineering, 45, 9, pp. 31-35, (2009)
  • [6] Seyranian A.P., Solem F., Pedereen P., Multi-parameter linear periodic systems : Sensitivity analysis and applications, Journal of Sound and Vibration, 229, 1, pp. 89-111, (2000)
  • [7] Wei J., Sun Q., Sun W., Et al., Dynamical coupling characteristics of a large wind turbine gearbox transmission system, Journal of Vibration and Shock, 31, 8, pp. 16-23, (2012)
  • [8] Huang G., Wang X., Mei G., Et al., Dynamic response analysis of gearbox housing system subjected to internal and external excitation in high-speed train, Journal of Mechanical Engineering, 51, 12, pp. 95-100, (2015)
  • [9] Chang C., Transmission relationship between high-speed train gearbox line test and vibration, (2015)
  • [10] Yuan Y., Li Q., Yang G., Et al., Line test and abnormal vibration analysis of high-speed train gearbox, Railway Locomotive & Car, 36, 1, pp. 24-29, (2016)
12