Modeling and Dynamics Analysis of High-Temperature Magnetic Bearing-Rotor System

被引：0
|
作者：
Jin, Chaowu [1 ]
Xin, Yu [1 ]
Zhou, Yang [1 ]
Zhao, Ruijin [1 ]
Zhou, Jin [1 ]
Xu, Yuanping [1 ]
机构：
[1] College of Mechanical & Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing
来源：
Xinan Jiaotong Daxue Xuebao/Journal of Southwest Jiaotong University | 2024年 / 59卷 / 04期
关键词：
aircraft engine; dynamics analysis; finite element method; high-temperature properties; magnetic bearing;
D O I：
10.3969/j.issn.0258-2724.20230667
中图分类号：
学科分类号：
摘要：
In the multi-electric aircraft engine, an active magnetic bearing can break through the limitation of temperature on the support part due to its high temperature resistance and non-contact characteristics, which enables its support part to be closer to the combustion chamber. In order to investigate the influence of temperature on the dynamic characteristics of the magnetic bearing-rotor system, a dynamics modeling method for a high-temperature magnetic bearing-rotor system was proposed. The temperature distributions of the rotor at different temperatures were obtained through simulation, and the axial temperature distribution of the rotor was fitted using polynomials. Based on the finite element method, the dynamics model of the flexible rotor unit was derived. The temperature influence was introduced, and the overall dynamics model of the magnetic bearing-rotor system considering the temperature influence was established. The accuracy of the model was verified by a modal test. The dynamic characteristics of the system were analyzed based on the theoretical dynamics model, and the results show that an increase in temperature leads to a decrease in the first three orders of the support modal frequency of the rotor and an increase in the amplitude of the amplitude frequency response of each order. When the temperature increases from room temperature to 450 ℃, the first three orders of the bending support modal frequency of the rotor decrease by 3.818%, 5.670%, and 3.183%, respectively, and the amplitudes of the first three orders of the bending modal amplitude frequency response increase by 83.4%, 34.4%, and 24.1%, respectively. © 2024 Science Press. All rights reserved.
引用
收藏
页码：746 / 754and822
相关论文
共 19 条
  • [1] WU Zhikun, LI Jun, SHI Ruijun, Current research status and key technologies of more-electric aeroengine, Advances in Aeronautical Science and Engineering, 3, 4, pp. 463-467, (2012)
  • [2] LIU Chengzi, ZHAN Jiang, YANG Yan, Et al., Review of research status and development of flexible rotor-magnetic bearing[J], Proceedings of the CSEE, 40, 14, pp. 4602-4614, (2020)
  • [3] (2011)
  • [4] ZIAEI-RAD S, KOUCHAKI E, IMREGUN M., Thermoelastic mdeling of rotor response with shaft rub[J], Journal of Applied Mechanics, 77, 6, (2010)
  • [5] ZHU Xiangzhe, HE Wei, YUAN Huiqun, Effects of steady temperature field on vibrational characteristics of a rotor system, Journal of Northeastern University (Natural Science), 29, 1, pp. 113-116, (2008)
  • [6] HE Peng, LIU Zhansheng, LIU Zhenxing, Finite element modelling of rotor considering the variation of Yang’s modulus with axial temperature distribution, Journal of Vibration and Shock, 31, 14, pp. 22-26, (2012)
  • [7] GOU X F, ZHU L Y, QI C J., Nonlinear dynamic model of a gear-rotor-bearing system considering the flash temperature[J], Journal of Sound and Vibration, 410, pp. 187-208, (2017)
  • [8] XIANG F G, CHEN X, ZHANG B, Et al., Simulation method of rotor dynamic characteristics considering temperature distribution and aerodynamic load, Proceedings of ASME Turbo Expo 2022： Turbomachinery Technical Conference and Exposition, pp. 13-17, (2022)
  • [9] DU T C, SUN Y H, GENG H P, Et al., Dynamic Analysis on Rotor System Supported by Active Magnetic Bearings based on Sliding Mode Control[C], 2018 IEEE International Conference on Mechatronics and Automation (ICMA), pp. 1960-1965, (2018)
  • [10] MUSHI S E, LIN Z L, ALLAIRE P E., Design, construction, and modeling of a flexible rotor active magnetic bearing test rig, ASME Transactions on Mechatronics, 17, 6, pp. 1170-1182, (2012)
12