Technology for monitoring automotive engine lubricating oil by dielectric constant method

被引:0
作者
Li X. [1 ,2 ]
Su J. [1 ]
Liu Y. [1 ]
机构
[1] College of Transportation, Jilin University
[2] College of Engineering and Technology, Jilin Agricultural University
来源
Xinan Jiaotong Daxue Xuebao/Journal of Southwest Jiaotong University | 2011年 / 46卷 / 05期
关键词
Dielectric constant; Lubricating oil; Plate capacitor; Sensors; Single chip microcomputer;
D O I
10.3969/j.issn.0258-2724.2011.05.020
中图分类号
学科分类号
摘要
In order to monitor the quality of lubricating oil quickly so as to replace the oil timely, a theoretical analysis method of dielectric constant was used to study the correlation between the iron abrasive grit content, moisture content and total acid value of the lubricating oil and the dielectric constant increment. The results reflect that the dielectric constant would increase with the iron grits content, moisture content, and total acid value of lubricant oil. On this basis, a lubricant dynamic monitoring device was developed. Experimental results show that the device can monitor the quality of lubricating oil of automotive engines in real time, so that the lubricating oil can be replaced timely according to the oil quality once the dielectric constant value of lubricating oil is out of the range from 4.7 to 4.2.
引用
收藏
页码:831 / 835
页数:4
相关论文
共 17 条
[1]  
pp. 5-97, (2005)
[2]  
Qin P., Yan B., Tan D., Study on fault diagnosis of sliding bearings using AE signals, Journal of Southwest Jiaotong University, 36, 3, pp. 272-275, (2001)
[3]  
Shen H., Liu J., Zhu M., Numerical simulation of radial fretting behaviors using ball-plate model, Journal of Southwest Jiaotong University, 45, 6, pp. 909-913, (2010)
[4]  
Gao H., Zhao X., Tang S., Application of oil contamination analysis to condition monitoring of marine diesel engine, Journal of China Three Gorges University: Natural Sciences, 25, 2, pp. 157-160, (2003)
[5]  
Zhang X., Yang D., Hu Z., Study of online oil monitoring technology based on dielectric constant measurement, Chinese Journal of Sensors and Actuators, 21, 12, pp. 2088-2091, (2008)
[6]  
Cao K., Performances evaluation of engine oil by dielectric constant, Synthetic Lubricants, 31, 2, pp. 4-6, (2004)
[7]  
pp. 57-68, (2002)
[8]  
(2008)
[9]  
Liu K., Oil monitoring technical based on dieleltric constant method, Lubrication Engineering, 34, 1, pp. 94-96, (2009)
[10]  
Wang H., Yin H., Luo W., Study on relationship between chemical indicators and permittivity of engine lubricating oil, Journal of Chongqing University of Technology: Natural Science, 24, 1, pp. 13-17, (2010)