Chitin nanocrystal reinforced wet-spun chitosan fibers

被引：0
作者：
机构：
[1] State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Material Science and Engineering, Donghua University
[2] Analysis and Testing Center, Donghua University
来源：
Ji, Y. (jiyali@dhu.edu.cn) | 1600年 / John Wiley and Sons Inc卷 / 131期
基金：
中国国家自然科学基金;
关键词：
fibers; mechanical properties; nanoparticles; nanowires and nanocrystals; polysaccharides;
D O I：
10.1002/app.40852
中图分类号：
学科分类号：
摘要：
Chitosan (CS) has been extensively studied and found wide applications in the field of biomedicine because of its favorable biological properties. Normal CS fibers are manufactured either by wet-spinning or by dry-jet wet-spinning. However, the poor tensile strength of CS fibers raises much concern. The present study uses chitin nanocrystal (ChiNC), a stiff rod-like nanofiller, to enhance the mechanical properties of wet-spun CS fibers. Owing to the good compatibility between CS and ChiNC, the nanoparticles are well distributed in the CS matrix. When the ChiNCs loading is 5 wt %, the optimal mechanical properties of CS fibers are obtained, and the peak stress is 2.2 cN/dtex and modulus is 145.6 cN/dtex, which are increased by 57% and 84.5%, respectively, compared to that of nonfilled CS fibers under the same processing condition. © 2014 Wiley Periodicals, Inc.
引用
收藏
相关论文
共 36 条
  • [1] Dash M., Chiellini F., Ottenbrite R.M., Chiellini E., Prog. Polym. Sci., 36, (2011)
  • [2] East G.C., Qin Y., J. Appl. Polym. Sci., 50, (1993)
  • [3] Agboh O.C., Qin Y., Polym. Adv. Technol., 8, (1997)
  • [4] Knaul J.Z., Hudson S.M., Creber K.A.M., J. Appl. Polym. Sci., 72, (1999)
  • [5] Yang Q., Liang B., Shen X., Tan Z., Zhang C., Huagong Jinzhan, 24, (2005)
  • [6] Rajendran S., Anand S.C., Indian J. Fiber Text. Res., 31, (2006)
  • [7] Muzzarelli R.A.A., Morganti P., Morganti G., Palombo P., Palombo M., Biagini G., Carbohydr. Polym., 70, (2007)
  • [8] Xie H., Khajanchee Y.S., Teach J.S., Shaffer B.S., J. Biomed. Mater. Res. B: Appl. Biomater., 85, (2008)
  • [9] Yudanova T.N., Reshetov I.V., Pharm. Chem. J., 40, (2006)
  • [10] Austin P.R., Brine C.J., Castle J.E., Zikakis J.P., Science, 212, (1981)
1234