Modal and Fatigue Life Analysis on Beam with Multiple Cracks Subjected to Axial Force

被引：0

作者：

Ma Y. ^{[1
]}

Chen G. ^{[2
]}

Wu X. ^{[2
]}

机构：

[1] School of Naval Architecture and Ocean Engineering, Jiangsu University of Science and Technology, Zhenjiang

[2] State Key Laboratory of Mechanics and Control for Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing

来源：

Chen, Guoping (gpchen@nuaa.edu.cn) | 2018年 / Nanjing University of Aeronautics an Astronautics卷 / 35期

关键词：

Axial force; Beam; Cracks; Fatigue life; Natural frequency;

D O I：

10.16356/j.1005-1120.2018.05.874

中图分类号：

学科分类号：

摘要：

Based on the transfer matrix method and Forman equation, a new method is proposed to conduct the modal and fatigue life analysis of a beam with multiple transverse cracks. In the modal analysis, the damping loss factor is introduced by the complex elastic modulus, bending springs without mass are used to replace the transverse cracks, and the characteristic transfer matrix of the whole cracked beam can be derived. In the fatigue life analysis, considering the interaction of the beam vibration and fatigue cracks growth, the fatigue life of the cracked beam is predicted by the timing analysis method. Numerical calculation shows that cracks have a significant influence on the modal and fatigue life of the beam. © 2018, Editorial Department of Transactions of NUAA. All right reserved.

引用

页码：874 / 882

页数：8

共 39 条

[31] Fatigue Life Analysis of Specimens Subjected to Infrequent Severe Loading using a Nonlinear Kinematic Hardening Cyclic Plasticity Model
Hu, Weiping
Wallbrink, Chris
11TH INTERNATIONAL FATIGUE CONGRESS, PTS 1 AND 2, 2014, 891-892 : 512 - 517
[32] Axial force measurement of the bolt/nut assemblies based on the bending mode shape frequency of the protruding thread part using ultrasonic modal analysis
Hosoya, Naoki
Niikura, Takanori
Hashimura, Shinji
Kajiwara, Itsuro
Giorgio-Serchi, Francesco
MEASUREMENT, 2020, 162 (162)
[33] Analysis Method of Transformer Fatigue Life and Damage Under Multiple Short-Circuit Conditions
Wang, Xiongbo
Li, Yan
Yu, Zhanyang
Miao, Yuxin
Li, Peng
Xu, Zhengyu
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2024, 34 (08)
[34] Fatigue Analysis of Long-Span Steel Truss Arched Bridge Part II: Fatigue Life Assessment of Suspenders Subjected to Dynamic Overloaded Moving Vehicles
Liu, Peng
Lu, Hongping
Chen, Yixuan
Zhao, Jian
An, Luming
Wang, Yuanqing
Liu, Jianping
METALS, 2022, 12 (06)
[35] Investigating Fatigue Life Effects on the Vibration Properties in Friction Stir Spot Welding Using Experimental and Finite Element Modal Analysis
Aghdam, Nima Jafarzadeh
Hassanifard, Soran
Ettefagh, Mir Mohammad
Nanvayesavojblaghi, Arvin
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2014, 60 (11): : 735 - 741
[36] Fatigue life analysis of steel-polypropylene hybrid fiber reinforced concrete subjected to uniaxial constant-amplitude cyclic compression
Cui K.
Xu L.
Chi Y.
Li L.
Li X.
Tumu Gongcheng Xuebao/China Civil Engineering Journal, 2023, 56 (09): : 26 - 38
[37] Investigation of bolt clamping force on the fatigue life of double lap simple bolted and hybrid (bolted/bonded) joints via experimental and numerical analysis
Esmaeili, F.
Chakherlou, T. N.
Zehsaz, M.
ENGINEERING FAILURE ANALYSIS, 2014, 45 : 406 - 420
[38] Accuracy analysis of fatigue life prediction in asphalt binders under multiple aging conditions based on simplified viscoelastic continuum damage (S-VECD) approach
Yang, Kai
Cui, Hongjun
Liu, Pan
Zhu, Minqing
An, Yifan
CONSTRUCTION AND BUILDING MATERIALS, 2024, 435
[39] Differential transform method and numerical assembly technique for free vibration analysis of the axial-loaded Timoshenko multiple-step beam carrying a number of intermediate lumped masses and rotary inertias
Yesilce, Yusuf
STRUCTURAL ENGINEERING AND MECHANICS, 2015, 53 (03) : 537 - 573

← 1 2 3 4 →