Modal and Fatigue Life Analysis on Beam with Multiple Cracks Subjected to Axial Force

被引:0
|
作者
Ma Y. [1 ]
Chen G. [2 ]
Wu X. [2 ]
机构
[1] School of Naval Architecture and Ocean Engineering, Jiangsu University of Science and Technology, Zhenjiang
[2] State Key Laboratory of Mechanics and Control for Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing
关键词
Axial force; Beam; Cracks; Fatigue life; Natural frequency;
D O I
10.16356/j.1005-1120.2018.05.874
中图分类号
学科分类号
摘要
Based on the transfer matrix method and Forman equation, a new method is proposed to conduct the modal and fatigue life analysis of a beam with multiple transverse cracks. In the modal analysis, the damping loss factor is introduced by the complex elastic modulus, bending springs without mass are used to replace the transverse cracks, and the characteristic transfer matrix of the whole cracked beam can be derived. In the fatigue life analysis, considering the interaction of the beam vibration and fatigue cracks growth, the fatigue life of the cracked beam is predicted by the timing analysis method. Numerical calculation shows that cracks have a significant influence on the modal and fatigue life of the beam. © 2018, Editorial Department of Transactions of NUAA. All right reserved.
引用
收藏
页码:874 / 882
页数:8
相关论文
共 39 条
  • [21] Fatigue behavior analysis and life prediction of elastic concrete and steel composite beam
    Li, Zilin
    Xing, Ying
    Han, Qinghua
    Guo, Qi
    Dongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Southeast University (Natural Science Edition), 2015, 45 (01): : 165 - 171
  • [22] Analysis of multiple interfacial cracks in an orthotropic bi-material subjected to anti-plane shear loading
    Matbuly, M. S.
    Nassar, M.
    ENGINEERING FRACTURE MECHANICS, 2009, 76 (11) : 1658 - 1666
  • [23] Analysis of large deformation and fatigue life of fabric braided composite hose subjected to cyclic loading
    Cho, J. R.
    Kim, Y. H.
    STEEL AND COMPOSITE STRUCTURES, 2016, 21 (04) : 949 - 962
  • [24] Hydrogen assisted fatigue life of Cr-Mo steel pressure vessel with coplanar cracks based on fatigue crack growth analysis
    Ma, Kai
    Zheng, Jinyang
    Hua, Zhengli
    Gu, Chaohua
    Zhang, Ruiming
    Liu, Yayu
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2020, 45 (38) : 20132 - 20141
  • [25] Multiple damage detection in a cantilever beam using baseline-free operational modal analysis
    Pacheco-Cherrez, Josue
    Probst, Oliver
    MATERIALS TODAY-PROCEEDINGS, 2022, 56 : 433 - 439
  • [26] Improvement of the fatigue life of an electron-beam welded Ti2AlNb joint subjected to an electromagnetic coupling treatment
    Li, Qiang
    Wang, Xiaotong
    Qin, Yi
    Huang, Kunlan
    Wang, Jie
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 909
  • [27] Fatigue crack growth in polysilicon microstructures subjected to multi-axial loading: A Poisson-Voronoi-based finite element analysis
    Xu, Rui
    Komvopoulos, Kyriakos
    INTERNATIONAL JOURNAL OF FATIGUE, 2023, 177
  • [28] Fatigue life analysis of polypropylene fiber reinforced concrete under axial constant-amplitude cyclic compression
    Cui, Kai
    Xu, Lihua
    Li, Xuefeng
    Hu, Xuan
    Huang, Le
    Deng, Fangqian
    Chi, Yin
    JOURNAL OF CLEANER PRODUCTION, 2021, 319
  • [29] Three dimensional analysis of low cycle fatigue failure in engine part subjected to multi-axial variable amplitude thermomechanical load
    Sharifi, Seyed Mohammad Hossein
    Googarchin, Hamed Saeidi
    Forouzesh, Farinaz
    ENGINEERING FAILURE ANALYSIS, 2016, 62 : 128 - 141