Modal and Fatigue Life Analysis on Beam with Multiple Cracks Subjected to Axial Force

被引：0

作者：

Ma Y. ^{[1
]}

Chen G. ^{[2
]}

Wu X. ^{[2
]}

机构：

[1] School of Naval Architecture and Ocean Engineering, Jiangsu University of Science and Technology, Zhenjiang

[2] State Key Laboratory of Mechanics and Control for Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing

来源：

Transactions of Nanjing University of Aeronautics and Astronautics | 2018年 / 35卷 / 05期

关键词：

Axial force; Beam; Cracks; Fatigue life; Natural frequency;

D O I：

10.16356/j.1005-1120.2018.05.874

中图分类号：

学科分类号：

摘要：

Based on the transfer matrix method and Forman equation, a new method is proposed to conduct the modal and fatigue life analysis of a beam with multiple transverse cracks. In the modal analysis, the damping loss factor is introduced by the complex elastic modulus, bending springs without mass are used to replace the transverse cracks, and the characteristic transfer matrix of the whole cracked beam can be derived. In the fatigue life analysis, considering the interaction of the beam vibration and fatigue cracks growth, the fatigue life of the cracked beam is predicted by the timing analysis method. Numerical calculation shows that cracks have a significant influence on the modal and fatigue life of the beam. © 2018, Editorial Department of Transactions of NUAA. All right reserved.

引用

页码：874 / 882

页数：8

共 23 条

[1]

Biswal A.R., Behera R.K., Roy T., Vibration analysis of a Timoshenko beam with transverse open crack by finite element method, Applied Mechanics & Materials, 592-594, pp. 2102-2106, (2014)

[2]

Ma Y., Chen G., Yang F., Modal analysis of a simply supported steel beam with cracks under temperature load, Shock and Vibration, 3, pp. 1-10, (2017)

[3]

Caddemi S., Calio I., The exact explicit dynamic stiffness matrix of multi-cracked Euler-Bernoulli beam and applications to damaged frame structures, Journal of Sound & Vibration, 332, 12, pp. 3049-3063, (2013)

[4]

Carrer J.A.M., Fleischfresser S.A., Garcia L.F.T., Et al., Dynamic analysis of Timoshenko beams by the boundary element method, Engineering Analysis with Boundary Elements, 37, 12, pp. 1602-1616, (2013)

[5]

Li X.F., Tang A.Y., Xi L.Y., Vibration of a Rayleigh cantilever beam with axial force and tip mass, Journal of Constructional Steel Research, 80, pp. 15-22, (2013)

[6]

Caddemi S., Calio I., The influence of the axial force on the vibration of the Euler-Bernoulli beam with an arbitrary number of cracks, Archive of Applied Mechanics, 82, 6, pp. 827-839, (2012)

[7]

Viola E., Ricci P., Aliabida M.H., Free vibration analysis of axially loaded cracked Timoshenko beam structures using the dynamic stiffness method, Journal of Sound and Vibration, 304, 1, pp. 124-153, (2007)

[8]

Li Q.S., Free vibration analysis of non-uniform beams with an arbitrary number of cracks and concentrated masses, Journal of Sound and Vibration, 252, 3, pp. 509-525, (2002)

[9]

Li Q.S., Vibratory characteristics of multi-step beams with an arbitrary number of cracks and concentrated masses, Applied Acoustics, 62, 6, pp. 691-706, (2001)

[10]

Li M., Analytical study on the dynamic response of a beam with axial force subjected to generalized support excitations, Journal of Sound & Vibration, 338, pp. 199-216, (2014)

← 1 2 3 →