Experimental study on the buckling behavior of Q420 high strength steel welded tubes under axial compression and design methods

被引：0
作者：
Shi, Gang [1 ]
Jiang, Xue [2 ]
Zhou, Wen-Jing [2 ]
Zhang, Yong [2 ]
机构：
[1] Key Laboratory of Civil Engineering Safety and Durability of China Education Ministry, Department of Civil Engineering, Tsinghua University, Beijing
[2] School of Civil Engineering, Beijing Jiaotong University, Beijing
来源：
Gongcheng Lixue/Engineering Mechanics | 2015年 / 32卷 / 02期
关键词：
Axial compression; Design method; High strength steel; Overall buckling; Welded tube;
D O I：
10.6052/j.issn.1000-4750.2013.07.0611
中图分类号：
学科分类号：
摘要：
The axial compression column test was conducted to investigate the overall buckling behavior of Q420 high strength submerged-arc welded steel tubes under axial compression, including 15 specimens. Based on the test results, the characteristics of buckling deformations were summarized and the relationship about buckling coefficients between the 15 test results and the Chinese code curves were compared, and the reliability of the finite element models was validated. Based on the calculation results of the parametric analysis using the finite element models, the buckling coefficients from the 60 calculated results of the finite element analysis and the Chinese code curves were compared. Finally, this paper proposed two kinds of suggestions about the overall buckling design method of the Q420 high strength submerged-arc welded steel tubes: one is for the choice of column curves in the Chinese code, that is, members under axial compression could be calculated as class-a section for its buckling capacity; the second suggestion was that a new column curve was suggested, in which the calculation parameters α1, α2, α3 to calculate the buckling coefficient φ of Chinese design code were updated. ©, 2015, Tsinghua University. All right reserved.
引用
收藏
页码：64 / 73
页数：9
相关论文
共 17 条
  • [11] Steel and steel products-location and preparation of test pieces for mechanical testing, (1998)
  • [12] The manufacturing code for transmission line steel tubular tower, (2009)
  • [13] Metallic materials-tensile testing at ambient temperature, (2002)
  • [14] Code for design of steel structures, (2003)
  • [15] Shi G., Ban H., Bijlaard F.S.K., Et al., Experimental study and finite element analysis on the overall buckling behavior of ultra-high strength steel compression members with end restraints, China Civil Engineering Journal, 44, 10, pp. 17-25, (2011)
  • [16] Shi G., Jiang X., Zhou W., Chan T.-M., Zhang Y., Experimental investigation and modeling on residual stress of welded steel circular tubes, International Journal of Steel Structures, 13, 3, pp. 495-508, (2013)
  • [17] Cold-formed welded circular tubes for building structures, (2012)
12