Dynamic response of multi-layer steel cylinder under internal intense blast loading

被引：0

作者：

Cui, Yun-Xiao ^{[1
,2
]}

Hu, Yong-Le ^{[3
]}

Wang, Chun-Ming ^{[2
]}

Hu, Hao ^{[2
]}

Chen, Peng-Wan ^{[1
]}

机构：

[1] State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing

[2] Northwest Institute of Nuclear Technology, Xi'an, 710024, Shaanxi

[3] Changsha University of Science & Technology, Changsha, 410114, Hunan

来源：

Baozha Yu Chongji/Explosion and Shock Waves | 2015年 / 35卷 / 06期

关键词：

Dynamic response; Internal blast loading; Multi-layer steel cylinder; Plastic deformation; Solid mechanics;

D O I：

10.11883/1001-1455(2015)06-0820-05

中图分类号：

学科分类号：

摘要：

In order to evaluate the protective effect and analyze the dynamic response of multi-layer steel cylinder under internal blast loading, we have conducted four experiments, with three different charge mass, ranging from 8.90 to 18.18 kg. The multi-layer steel cylinder we used is composed of 4 layers made of Q345 steel. The 4 layers altogether are 50 mm in thickness, with the 3 inner ones as 10 mm and the outer one as 20 mm respectively. The diameter of the innermost layer is 800 mm and the distance between layers is 5 mm. At the section of charge center and 20 cm axial distance from the charge, the hoop strain and axial strain are measured by eight strain gauges set on the outside of steel shell. Under the blast loading, the plastic deformation occurred locally at the charge center, and the largest deformation appeared at the innermost layer. However, even in the circumstance of the largest charge mass, there is no failure. It is concluded that the thickness of the steel cylinder could be predicted accurately with the energy absorbing design method applied to the unit section of the charge center of the multi-layer steel cylinder. With a proper change in charge mass, the peak hoop strain can reduce to about 1/2 of the section at the charge center, when the axial distance is beyond the 1/4 diameter of the inner layer. © 2015, Explosion and Shock Waves. All right reserved.

引用

页码：820 / 824

页数：4

共 11 条

[1] Zhao S.-D., Blast chamber, Explosion and Shock Waves, 9, 1, pp. 85-96, (1989)
[2] Hu B.-Y., Bai J.-S., Liu D.-M., Et al., The engineering design method of explosion-containment vessel and its application, Pressure Vessel Technology, 17, 2, pp. 39-41, (2000)
[3] Ashby M.F., Evans A., Fleck N.A., Metal Foams: A Design Guide, (2000)
[4] Zhou G., Tang Y.-Z., Guan J.-Q., Et al., Explore of design and experiments for plastically deformed explosion containment vessels, Transactions of Beijing Institute of Technology, 23, pp. 267-272, (2003)
[5] Cui Y.-X., Hu Y.-L., Wang W.-P., Et al., Experimental analysis of a sand tamped explosion vessel, Proceedings of the 7th International Conference on Shock & Impact Loads on Structures, pp. 187-194, (2007)
[6] Wang W.-P., Hu Y.-L., Lin J.-D., Et al., Experiments and numerical analyses on dynamic deformation of steel-concrete structure under internal intense blast loading, Proceedings of the 7th International Conference on Shock & Impact Loads on Structures, pp. 613-620, (2007)
[7] Taylor G.I., The Fragmentation of Tubular Bombs, pp. 387-390, (1963)
[8] Zhong F.-P., Ma Y.-J., Zhang D.-Z., Et al., Research on plastic deformation of multi-layer cylindrical steel tube subjected to blasts of spherical and cylindrical charges, Acta Armamentarii, 30, pp. 194-196, (2009)
[9] Zheng J.-Y., Deng G.-D., Chen Y.-J., Et al., Experimental investigation on dynamic response and fracture characteristics of discrete multilayered thick-walled explosion containment vessels, Explosion and Shock Waves, 25, 6, pp. 506-511, (2005)
[10] Pastrnak J.W., Henning C.D., Switzer V.A., Et al., Seal monitoring system for an explosive containment vessel, (2004)

← 1 2 →