Mechanical properties of Macadamia nutshell powder and PLA bio-composites

被引：17

作者：

Dong C. ^{[1
]}

Davies I.J. ^{[1
]}

Fornari Junior C.C.M. ^{[2
]}

Scaffaro R. ^{[3
]}

机构：

[1] Department of Mechanical Engineering, Curtin University, Perth

[2] Departamento de Ciências Exatas e Tecnológicas, Universidade Estadual de Santa Cruz-UESC, Ilhéus-Ba

[3] Dipartimento di Ingegneria Chimica dei Processi e dei Materiali, Università di Palermo, Palermo

来源：

Dong, Chensong (c.dong@curtin.edu.au) | 2017年 / Taylor and Francis Ltd.卷 / 15期

关键词：

composites; Macadamia; nutshell; PLA; strength;

D O I：

10.1080/14484846.2016.1187245

中图分类号：

学科分类号：

摘要：

A study on the mechanical properties of Macadamia nutshell powder/PLA bio-composites is presented in this paper. The effects of powder weight content, powder condition and processing methods are investigated with the aid of Design of Experiments. It is shown from the results that both the stiffness and strength are dependent on the weight content of Macadamia nutshell powders. The elastic modulus increases 9.8% when the Macadamia nutshell powder content is 40%. Both flexural and tensile strengths decrease with increasing Macadamia nutshell powder content. On average, when the Macadamia nutshell powder content is 40%, the decreases in the flexural and tensile strengths are 42 and 63%, respectively, compared to pure PLA. The hardness is independent of the weight content of nutshell powders. © 2016 Engineers Australia.

引用

页码：150 / 156

页数：6

共 50 条

[41] Advances and Applications of Cellulose Bio-Composites in Biodegradable Materials
Zhen Chen
Tariq Aziz
Hongyue Sun
Asmat Ullah
Amjad Ali
Li Cheng
Roh Ullah
Farman Ullah Khan
Journal of Polymers and the Environment, 2023, 31 : 2273 - 2284
[42] Advances and Applications of Cellulose Bio-Composites in Biodegradable Materials
Chen, Zhen
Aziz, Tariq
Sun, Hongyue
Ullah, Asmat
Ali, Amjad
Cheng, Li
Ullah, Roh
Khan, Farman Ullah
JOURNAL OF POLYMERS AND THE ENVIRONMENT, 2023, 31 (06) : 2273 - 2284
[43] Development and evaluation of mechanical properties for Kenaf fibers/PLA composites
Ben, Goichi
Kihara, Yuichi
ADVANCES IN COMPOSITE MATERIALS AND STRUCTURES, PTS 1 AND 2, 2007, 334-335 : 489 - +
[44] Production and mechanical characterization of reinforced zinc oxide nanoparticle-coated silk waste bio-composites
Godias Tumusiime
Paul Wambua
Samson Rwahwire
David Njuguna
Vianney Andrew Yiga
Polymer Bulletin, 2023, 80 : 8799 - 8818
[45] PLA/PEG/MWCNT composites with improved processability and mechanical properties
Wang, Shiwei
Wu, Ruguang
Zhang, Jianming
Leng, Yuting
Li, Qian
POLYMER-PLASTICS TECHNOLOGY AND MATERIALS, 2021, 60 (04): : 430 - 439
[46] Production and mechanical characterization of reinforced zinc oxide nanoparticle-coated silk waste bio-composites
Tumusiime, Godias
Wambua, Paul
Rwahwire, Samson
Njuguna, David
Yiga, Vianney Andrew
POLYMER BULLETIN, 2023, 80 (08) : 8799 - 8818
[47] Advanced wood- and bio-composites: Enhanced performance and sustainability
Winandy, Jerrold E.
ADVANCED MATERIALS AND PROCESSING IV, 2007, 29-30 : 9 - 14
[48] Formulating the effects of applied temperature and pressure of hot pressing process on the mechanical properties of polypropylene-hydroxyapatite bio-composites by response surface methodology
Younesi, M.
Bahrololoom, M. E.
MATERIALS & DESIGN, 2010, 31 (10) : 4621 - 4630
[49] An interactive study on wear behaviour and mechanical properties of carbonized eggshells filler loaded glass-jute reinforced polyester hybrid bio-composites
Kumar, Navin
Walia, R. S.
Angra, Surjit
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2022, 16 (03): : 913 - 925
[50] Effects of Bio-Based Polyelectrolyte Complex on Thermal Stability, Flammability, and Mechanical Properties Performance Utilization in PLA/PBS Composites
Shih, Yeng-Fong
Lin, Ching-Wei
Cai, Yu-Liang
Jahan, Kousar
Chen, Ying-Hsiao
BUILDINGS, 2023, 13 (01)

← 1 2 3 4 5 →