CRYSTAL PLASTICITY FINITE CELL SELF-CONSISTENT CLUSTERING ANALYSIS METHOD FOR METAL ADDITIVE MANUFACTURING

被引：0

作者：

Yu, Fei ^{[1
]}

Lian, Yanping ^{[1
,2
]}

Li, Mingjian ^{[1
]}

Gao, Ruxin ^{[1
]}

机构：

[1] Institute of Advanced Structure Technology, Beijing Institute of Technology, Beijing

[2] Beijing Key Laboratory of Lightweight Multi-Functional Composite Materials and Structures, Beijing Institute of Technology, Beijing

来源：

Lixue Xuebao/Chinese Journal of Theoretical and Applied Mechanics | 2024年 / 56卷 / 07期

关键词：

additive manufacturing; crystal plasticity; data-driven method; finite cell method; self-consistent clustering analysis;

D O I：

10.6052/0459-1879-23-624

中图分类号：

学科分类号：

摘要：

Metal additive manufacturing (AM) is an advanced digital manufacturing technology with distinctive advantages in the rapid fabrication of intricate and high-performance parts. However, there are deviations between the mechanical properties of the as-built material and their intended design counterparts due to the complex microstructure of the fabricated material and the inevitable defects that occur during the manufacturing process. To accurately predict the material properties, employing an efficient numerical method that considers the actual microstructural features is crucial. In this study, a crystal plasticity finite cell-self-consistent clustering analysis (CPFC-SCA) method is proposed. It consists of two distinct calculation stages: an offline stage for data preparation and an online stage for rapid calculations. During the offline stage, the CPFC and a clustering method are integrated to discretize the representative volume element (RVE) of the as-built material microstructure. Subsequently, during the online stage, the SCA derived from the subdomain weighted residual formulation and crystal plasticity involving the Hall-Patch effect are utilized to solve the Lippmann-Schwinger equation of the RVE, and the numerical results are further utilized to determine the effective mechanical properties through the homogenization of stress and strain. Several numerical examples, RVEs with and without the irregular void, are presented to showcase the accuracy and efficiency of the proposed method. Furthermore, we applied the proposed method to numerically address the as-built mechanical properties of additively manufactured IN625 using selective laser melting, and the numerical results shed light on the relationship between the process parameters and the mechanical properties. It is demonstrated that the proposed method is a promising numerical simulation tool with high efficiency in predicting the mechanical properties of materials fabricated by metal additive manufacturing. © 2024 Chinese Society of Theoretical and Applied Mechanics. All rights reserved.

引用

页码：1916 / 1930

页数：14

共 31 条

[1]

Lian Yanping, Wang Panding, Gao Jie, Et al., Fundamental mechanics problems in metal additive manufacturing: A state- of-art review, Advances in Mechanics, 51, 3, pp. 648-701, (2021)

[2]

Chen Zekun, Jiang Jiaxi, Wang Yujia, Et al., Defects, microstructures and mechanical prop-erties of materials fabricated by metal additive manufacturing, Chinese Journal of Theoretical and Applied Mechanics, 53, pp. 3190-3205, (2021)

[3]

Vafadar A, Guzzomi F, Rassau A, Et al., Advances in metal additive manuf-acturing: a review of common processes, industrial applications, and current challenges, Applied Sciences, 11, 3, (2021)

[4]

Singh BJ, Sehgal R., Singh RP., Additive manufacturing in biomedical and healthcare sector: an umbrella review, International Journal on Interactive Design and Manufacturing, (2023)

[5]

Chen Jiawei, Xiong Feiyu, Huang Chenyang, Et al., Numerical simulation on metallic additive manufact-uring, Sci Sin-Phys Mech Astron, 50, 9, pp. 104-128, (2020)

[6]

Grasso M, Colosimo BM., Process defects and in situ monitoring methods in metal powder bed fusion: A review, Measurement Science and Technology, 28, 4, (2017)

[7]

Debroy T, Wei H, Zuback J, Et al., Additive manufacturing of metallic components–process, structure and properties, Progress in Materials Science, 92, pp. 112-224, (2018)

[8]

Chen Zekun, Li Xiaoyan, Numerical simu-lations for microstructure evolution during metal additive manufacturing, Advances in Mechanics, 52, 2, pp. 397-409, (2022)

[9]

Panwisawas C, Tang YT, Reed RC., Metal 3D printing as a disruptive tec-hnology for superalloys, Nature Communications, 11, 1, (2020)

[10]

Bang GB, Kim WR, Kim HK, Et al., Effect of process parameters for sele-ctive laser melting with SUS316L on mechanical and microstructural prop-erties with variation in chemical composition, Materials & Design, 197, (2021)

← 1 2 3 4 →