Effect of aluminium addition on the magnetic properties of a semi-processed electrical steel

被引：0
|
作者：
Marra K.M. [1 ]
Marra L.C. [2 ]
Buono V.T.L. [3 ]
机构：
[1] Department of Mechanical Engineering, Centro Universitário UNA, Belo Horizonte, MG
[2] Department of Chemical Engineering, Universidade Federal de São João Del Rei, Ouro Branco, MG
[3] Department of Metallurgical and Materials Engineering, Universidade Federal de Minas Gerais, Belo Horizonte, MG
来源：
| 1600年 / Universidade Federal de Sao Carlos卷 / 19期
关键词：
Aluminum Addition; Magnetic Core Loss; Magnetic Permeability; Semi-Processed Electrical Steel;
D O I：
10.1590/1980-5373-MR-2015-0659
中图分类号：
学科分类号：
摘要：
Aluminum is often added to electrical steels since this element causes improvement of the magnetic properties. However the addition of aluminum is usually limited to 0.30 wt%1. Therefore, this work aimed at evaluating the influence of higher levels of aluminum in the magnetic properties of semi-processed steels. To accomplish this, four types of steel were produced in laboratory with different aluminum contents (0.10, 0.30, 0.60 and 1.0 wt%). Carbon, manganese and silicon concentrations were kept constant. It was observed that an increased aluminum content caused reduction of the magnetic core loss, especially of the eddy current component. However, the magnetic permeability virtually wasn't influenced by aluminum concentration.
引用
收藏
页码：1162 / 1166
页数：4
相关论文
共 50 条
  • [21] The origin of grain size inhomogeneity in semi-processed electrical steels
    Landgraf, FJG
    Takanohashi, R
    Chagas, FC
    de Campos, MF
    Falleiros, IGS
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2000, 215 : 92 - 93
  • [22] Effect of temper rolling on texture formation of semi-processed non-oriented steel
    Shimazu, T., 1600, Publ by Elsevier Science Publ Co Inc, New York, NY, United States (133): : 1 - 3
  • [23] Texture evolution of semi-processed non-oriented silicon steel with temper rolling
    Xie, Qing-Ge
    Wang, Quan-Li
    Luo, Hai-Wen
    Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2009, 31 (07): : 855 - 861
  • [24] THE HIGH-QUALITY, EFFICIENT, AUTOMATED HEAT-TREATMENT OF SEMI-PROCESSED ELECTRICAL STEEL LAMINATIONS IN SMALL BATCH QUANTITIES
    HANCOCK, RG
    DOLMAN, SE
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 1984, 41 (1-3) : 49 - 52
  • [25] Goss Texture Formation by Strain Induced Boundary Migration in Semi-Processed Nonoriented Electrical Steels
    Park, Jong-Tae
    Han, Kyu-Seok
    RECRYSTALLIZATION AND GRAIN GROWTH IV, 2012, 715-716 : 837 - 842
  • [26] Annealing of Stacked Stampings of Semi-Processed Electrical Sheet to Reduce Costs in the Manufacture of Electric Motors.
    Mirbach, E.
    Wirtnik, K.P.
    Gaswaerme International, 1987, 36 (08): : 432 - 437
  • [27] Effect of Cold Rolling Prior to Annealing on the Grain Size-Energy Losses Relationship in a Low Carbon Grain Non-Oriented Semi-Processed Electrical Steel
    Margarita Lopez-Granados, Nancy
    Jose Gutierrez-Castaneda, Emmanuel
    Salinas-Rodriguez, Armando
    METALS, 2022, 12 (07)
  • [28] Effect of Cu addition on microstructure, texture and magnetic properties of 6.5 wt% Si electrical steel
    Cheng, Zhaoyang
    Liu, Jing
    Xiang, Zhidong
    Jia, Juan
    Volkova, Olena
    Wendler, Macro
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2021, 519
  • [29] Orientation dependence of stored energy of cold work in semi-processed electrical steels after temper rolling
    Castro, S. F.
    Gallego, J.
    Landgraf, F. J. G.
    Kestenbach, H. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 427 (1-2): : 301 - 305
  • [30] Effect of iron addition to aluminium on the structure and properties of wires used for electrical purposes
    Jablonski, Michal
    Knych, Tadeusz
    Smyrak, Beata
    LIGHT METALS TECHNOLOGY V, 2011, 690 : 459 - 462
12345