Review on the recycling technologies of electronic components from waste printed circuit boards

被引：0

作者：

Sun C. ^{[1
]}

Guo J. ^{[1
]}

Wang J. ^{[1
]}

Xu Z. ^{[1
]}

机构：

[1] School of Environmental Science and Engineering, Shanghai Jiao Tong University, Shanghai

来源：

Cailiao Daobao/Materials Review | 2016年 / 30卷 / 05期

关键词：

Disassembling technology; Electronic components; Recycling technology; Unsoldering methods; WPCBs;

D O I：

10.11896/j.issn.1005-023X.2016.09.017

中图分类号：

学科分类号：

摘要：

Electronic components are widely used in the electronic and electrical appliances. However, large quantities of electronic components are coming into discarding period due to the endless requirement for new products and market explosion for electronic and electrical products. The valuable materials and toxic materials of electronic components are analyzed. The new recycling processes for electronic components are reviewed, including the disassembling technologies (unsoldering methods and separation methods) and recycling technologies. On this basis, some new trends and suggestions on recovery of electronic components in waste printed circuit boards (WPCBs) are put forward. © 2016, Materials Review Magazine. All right reserved.

引用

页码：105 / 109

页数：4

共 28 条

[1]

Ogunseitan O.A., Schoenung J.M., Saphores J.D.M., Et al., The electronics revolution: From E-Wonderland to E-Wasteland, Science, 326, (2009)

[2]

Robinson B.H., E-waste: An assessment of global production and environmental impacts, Sci Total Environ, 408, (2009)

[3]

Guo Y., Huang C., Zhang H., Et al., Heavy metal contamination from electronic waste recycling at Guiyu, southeastern China, J Environ Quality, 38, (2009)

[4]

Wong M.H., Wu S.C., Deng W.J., Et al., Export of toxic chemicals-A review of the case of uncontrolled electronic-waste recycling, Environ Pollution, 149, (2007)

[5]

Chancerel P., Meskers C.E.M., Hageluken C., Et al., Assessment of precious metal flows during preprocessing of waste electrical and electronic equipment, J Ind Ecology, 13, 5, (2009)

[6]

Hu T., Zeng G., Yuan X., Precious metal recovery from waste household appliances, China Resources Comprehensive Utilization, 7, (2001)

[7]

He J., Duan C., He Y., Et al., Metal recovery from discarded rrinted circuit poard by mechanical processing of wet crushing and separation, Environ Sci Technol, 4, (2010)

[8]

Zhu N., Xiang Y., Zhang T., Et al., Bioleaching of metal concentrates of waste printed circuit boards by mixed cultured of acidophilic bacteria, J Hazard Mater, 192, 2, (2011)

[9]

Xing M.F., Zhang F.S., Degradation of brominated epoxy resin and metal recovery from waste printed circuit boards through batch sub/supercritical water treatments, Chem Eng J, 219, (2013)

[10]

Wang J.B., Xu Z.M., Disposing and recycling waste printed circuit boards: Disconnecting, resource recovery, and pollution control, Environ Sci Technol, 49, 2, (2015)

← 1 2 3 →