Research on the PLC control technology of servo track for electrical discharge

被引：0

作者：

Lv, Shu-Dong ^{[1
]}

机构：

[1] Department of Experiment Teaching, Yancheng Institute of Technology

来源：

Journal of Convergence Information Technology | 2012年 / 7卷 / 22期

关键词：

Electrical discharge milling; PLC; Servo track;

D O I：

10.4156/jcit.vol7.issue22.10

中图分类号：

学科分类号：

摘要：

In order to improve the controlling precision of the servo trace of the electrical discharge milling, PLC is applied in the design of controlling system of it. First, the reviews on the relating researches are summarized. Second, the technology of the electrical discharging machining is analyzed. Third, the formed and shift method of the servo motion trace for the electrical discharge milling machining are discussed. And then the hardware and software of the controlling system of the servo trace of the electrical discharging machining are designed. Finally, the test verification of the controlling system of the servo trace is carried out, and results show that this controlling system can improve the machining reliability of the electrical discharging milling.

引用

页码：76 / 83

页数：7

共 16 条

[1]

Hung J.-C., Yang T.-C., Li K.-C., Studies on the fabrication of metallic bipolar plates-Using micro electrical discharge milling machining milling, JPS: Journal of Power Sources, 196, 4, pp. 2070-2074, (2011)

[2]

Ren-jie J., Yong-hong L., Yan-zhen Z., Compound machining of silicon carbide ceramics by high speed end electrical discharge milling and mechanical grinding, CSB: Chinese Science Bulletin, 57, 4, pp. 421-434, (2012)

[3]

Hung J.-C., Chang D.-H., Chuang Y., The fabrication of high-aspect-ratio microflow channels on metallic bipolar plates using die-sinking micro-electrical discharge milling machining, JPS: Journal of Power Sources, 198, 15, pp. 158-163, (2012)

[4]

Mai C., Hocheng H., Huang S., Advantages of carbon nanotubes in electrical discharge milling machining, TIJAMT: The International Journal of Advanced Manufacturing Technology, 9, 1-2, pp. 111-117, (2012)

[5]

Beri N., Kumar A., Maheshwari S., Optimisation of electrical discharge milling machining process with CuW powder metallurgy electrode using grey relation theory, ITMMM: International Journal of Machining and Machinability of Materials, 59, 1-4, pp. 103-115, (2011)

[6]

Bai C.-Y., Lee J.-L., Wen T.-M., The characteristics of chromized 1020 steel with electrical discharge milling machining and Ni electroplating pretreatments, ASS: Applied Surface Science, 257, 8, pp. 3529-3537, (2011)

[7]

Xiao H., Shi L., The Design of Partial Electric and Control System for 500kV Substation, LNEE: Lecture Notes in Electrical Engineering, 140, pp. 497-503, (2012)

[8]

Hu W., Guo L., Research of Automation Control System of Manipulator Based on PLC, AISC: Advances in Intelligent and Soft Computing, 160, pp. 615-619, (2012)

[9]

Yu S., Xu X., An Input and Output Monitoring System for FPGA-based Hardware PLC, IJEI: International Journal of Engineering and Industries, 3, 1, pp. 34-44, (2012)

[10]

Jun L., Shulin K., The Study on Multi-motor Control System Based on Fuzzy PID Control and BP Neural Network, AISS: Advances in Information Sciences and Service Sciences, 4, 1, pp. 100-107, (2012)

← 1 2 →