Method of geometric error detection for measuring machine based on laser interferometer

被引：0
作者：
Zhu J. [1 ]
Li X. [1 ]
Tan W. [1 ]
Xiang H. [1 ]
Chen C. [1 ]
机构：
[1] State Key laboratory of Precise Measurement Technology and Instrument, Tianjin University
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2010年 / 46卷 / 10期
关键词：
Coordinate measuring machines; Error detection; Laser interferometry;
D O I：
10.3901/JME.2010.10.025
中图分类号：
学科分类号：
摘要：
Error compensation is an important technology to improve the precision of measuring machines. It includes the establishment of error model, error detection and error compensation. According to measuring machines with a sort of special structure, a method of geometric error detection based on laser interferometer is proposed. Mathematical model including 13 original geometric errors is established for error compensation. Each single geometric error including position error, linear motion error, angular motion error and perpendicularity error is detected respectively. Error detection module using this method can also be embedded in measuring software to achieve rapid and repeatable error detections. Results of experiment show that the measurement error of single axis can be reduced from 0.1399 mm to 0.0017 mm within the measuring range of 176 mm after error compensation. It is proved that the novel method is an effective way to improve precision of measuring machines.
引用
收藏
页码：25 / 30
页数：5
相关论文
共 10 条
  • [1] Zhang G., Coordinate Measuring Machine, (1999)
  • [2] Zhang G., Error compensation: An important direction for precision improvement of coordinate measuring machine, Machine Tool, 8, pp. 37-39, (1980)
  • [3] Wang L., Zhang G., Xu X., Theore-tical analysis on the error of three coordinate measuring system based on the leapfrog type, Journal of Mechanical Engineering, 45, 4, pp. 304-308, (2009)
  • [4] Zhang H., Zhou Y., Tang X., Et al., Measurement compensation of volumetric errors of CNC machine centers using an auto-alignment laser interferometer, Chinese Journal of Mechanical Engineering, 38, 9, pp. 96-100, (2002)
  • [5] Ren Y., Yang J., Study on decoupling of synthesis error compensation for a 5-axis CNC machine tool, Chinese Journal of Mechanical Engineering, 40, 2, pp. 55-59, (2004)
  • [6] Gao M., Li T., Yin W., Et al., Calibration method for a parallel kinematic machine based on relativity analysis, Chinese Journal of Mechanical Engineering, 41, 1, pp. 88-92, (2005)
  • [7] Zhang M., The geometric error detection and distinguishing of laser interferometer-based NC machine tool, Mechanical Engineer, 9, pp. 76-78, (2006)
  • [8] Zhang H., Zhou Y., Tang X., Et al., Measurement using laser interferometer and software compensation of volumetric errors of three-axis CNC machining centers, China Mechanical Engineering, 13, 21, pp. 1838-1841, (2002)
  • [9] Cao L., Rapid detection of the accuracy of positioning axes in machine using a laser interferometer, Infrared and Laser Engineering, 37, pp. 200-202, (2008)
  • [10] Zhang H., Zhou Y., Tang X., Et al., The software compensation technique of positioning errors for CNC machine tools, Journal of Huazhong University of Science and Technology, 29, 4, pp. 47-49, (2001)
1